Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Steel Metric Gauge Block Sets
Series 516 - 2mm Base Specifications
Accuracy
EN ISO 3650
Inspection certificate
Steel 88-block set Steel 33-block set
Blocks Block allocation Mitutoyo Gauge Blocks and Inspection Certificates
per Set
No. Grade Size Step Quantity A Inspection Certificate is furnished with all
88 Mitutoyo gauge blocks with a serial number on the
516-503-10* 1 1.0005 -1 box (in the case of sets) and an identification
46 number on each block. The deviation of each block
2.001 - 2.009 0.001 9 from nominal length, at the time of inspection, is
33 stated. For this inspection, each gauge block is
2.01 - 2.49 0.01 49 measured relative to the upper level master using a
gauge block comparator. Grade K gauge blocks are
0.5 - 9.5 0.5 19 measured by a primary measurement method using
an interferometer.
10 - 100 10 10 The 2mm-based gauge block, which take the base of
the minimum length step as 2mm, are easy to handle
516-507-10* 1 2.001 - 2.009 0.001 9 and will not warp, as compared to the 1mm-based
gauge blocks.
516-508-10* 2 2.01 - 2.09 0.01 9
2.1 - 2.9 0.1 9
1-9 1 9
10 - 100 10 10
516-510-10* 0 2.005 -1
516-511-10* 1 2.01 - 2.09 0.01 9
516-512-10* 2 2.1 - 2.9 0.1 9
1-9 1 9
10 - 30 10 3
60, 100 -2
392 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru