Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Steel Individual Metric Gauge Blocks
Specifications EN ISO 3650 Metric Blocks 1.19 mm
Accuracy
Ordering example: To order a 0.1 mm ISO Standard grade 1
block with JCSS calibration certificate, choose No. 611821-036.
Calibration Inspection
Certificate Certificate
Length (mm) No. Length (mm) No. Length (mm) No.
0.1 611821 0.53 611894 0.96 611937
0.11 611860 0.54 611895 0.97 611938
0.12 611861 0.55 611896 0.98 611939
0.13 611862 0.56 611897 0.99 611940
0.14 611863 0.57 611898 0.991 611551
0.15 611822 0.58 611899 0.992 611552
0.16 611864 0.59 611900 0.993 611553
0.17 611865 0.6 611901 0.994 611554
0.18 611866 0.61 611902 0.995 611555
0.19 611867 0.62 611903 0.996 611556
0.2 611823 0.63 611904 0.997 611557
0.21 611868 0.64 611905 0.998 611558
Mitutoyo Gauge Blocks and Inspection Certificates 0.22 611869 0.65 611906 0.999 611559
A Inspection Certificate is furnished with all
0.23 611870 0.66 611907 1 611611
Mitutoyo gauge blocks with a serial number on the
box (in the case of sets) and an identification 0.24 611871 0.67 611908 1.0005 611520
number on each block. The deviation of each block 0.25 611824 0.68 611909 1.001 611521
from nominal length, at the time of inspection, is
stated. For this inspection, each gauge block is 0.26 611872 0.69 611910 1.002 611522
measured relative to the upper level master using a 0.27 611873 0.7 611911 1.003 611523
gauge block comparator. Grade K gauge blocks are
measured by a primary measurement method using 0.28 611874 0.71 611912 1.004 611524
an interferometer. 0.29 611875 0.72 611913 1.005 611525
JCSS Calibration Certificate 0.3 611825 0.73 611914 1.006 611526
These Gauge Block Sets are delivered with a JCSS
Certificate of Calibration (Japan Calibration Service 0.31 611876 0.74 611915 1.007 611527
System). 0.32 611877 0.75 611916 1.008 611528
A JCSS Certificate of Calibration is comparable with
0.33 611878 0.76 611917 1.009 611529
e.g. DAkkS COFRAC, RVA or UKAS Certificate of
Calibration. 0.34 611879 0.77 611918 1.01 611561
This calibration result is accepted internationally. 0.35 611826 0.78 611919 1.02 611562
0.36 611880 0.79 611920 1.03 611563
0.37 611881 0.8 611921 1.04 611564
0.38 611882 0.81 611922 1.05 611565
0.39 611883 0.82 611923 1.06 611566
0.4 611827 0.83 611924 1.07 611567
0.41 611884 0.84 611925 1.08 611568
0.42 611885 0.85 611926 1.09 611569
0.43 611886 0.86 611927 1.1 611570
0.44 611887 0.87 611928 1.11 611571
0.45 611828 0.88 611929 1.12 611572
0.46 611888 0.89 611930 1.13 611573
0.47 611889 0.9 611931 1.14 611574
0.48 611890 0.91 611932 1.15 611575
0.49 611891 0.92 611933 1.16 611576
0.5 611506 0.93 611934 1.17 611577
0.51 611892 0.94 611935 1.18 611578
0.52 611893 0.95 611936 1.19 611579
For prices please refer to the online For prices please refer to the online For prices please refer to the online
catalogue catalogue catalogue
For prices please refer to the online catalogue
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended 397
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times. mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru