Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
Specifications EN ISO 3650 для размещения заказа - mitutoyo@mitutoyo-tools.ru
Accuracy
CERA Metric Gauge Block Sets
Calibration Inspection
Series 516 - 0.001 mm step certificate certificate
• Thin block set
• 0,001 mm step
Ordering example: To order an ISO Standard 18-block grade 1
set with calibration certificate, choose 516-375-60.
ets.
Mitutoyo Gauge Blocks and Inspection Certificates CERA 18-block set CERA 9-block
A Certificate of Inspection is furnished with all Blocks Standard / grade available and Suffix No. * Block allocation
Mitutoyo gauge blocks with a serial number on the per Set
No. ISO/DIN/JIS Size Step Quantity
box (in the case of sets) and an identification 18
number on each block. The deviation of each block 516-373 (Grade K): -X0 0.991 - 0.999 0.001 9
9
from nominal length, at the time of inspection, is 516-374 (Grade 0): -X0 1.001 - 1.009 0.001 9
stated. For this inspection, each gauge block is 9
516-375 (Grade 1): -X0
measured relative to the upper level master using a
gauge block comparator. Grade K gauge blocks are 516-376 (Grade 2): -X0
measured by a primary measurement method using
516-381 (Grade K): -X0 1.001 - 1.009 0.001 9
an interferometer.
516-382 (Grade 0): -X0
516-383 (Grade 1): -X0
516-384 (Grade 2): -X0
516-385 (Grade K): -X0 0.991 - 0.999 0.001 9
516-386 (Grade 0): -X0
516-387 (Grade 1): -X0
516-388 (Grade 2): -X0
Specifications Series 516 - Cera Wear block sets
Accuracy
EN ISO 3650
Inspection
certificate
Protection gauge blocks (highlighted in grey above) are placed at each end of the
gauge block stack to absorb the wear caused by contact with workpieces.
Mitutoyo Gauge Blocks and Inspection Certificates CERA 2-block set
A Inspection Certificate is furnished with all Blocks Block allocation
Mitutoyo gauge blocks with a serial number on the per Set
No. Grade Size Step Quantity
box (in the case of sets) and an identification 2
number on each block. The deviation of each block 516-832-10 0 1- 2
2
from nominal length, at the time of inspection, is 516-833-10* 1
stated. For this inspection, each gauge block is
516-830-10* 0 2- 2
measured relative to the upper level master using a
gauge block comparator. Grade K gauge blocks are 516-831-10* 1
measured by a primary measurement method using
an interferometer.
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended 403
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times. mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru