Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык. Страница 411

для размещения заказа - mitutoyo@mitutoyo-tools.ru

Ceraston

Accessory for Gauge Block Maintenance

• Alumina-ceramic abrasive stone for removing burrs from hard materials such as ceramics that
ordinary stones cannot handle.

• Can be used both for steel gauge blocks and CERA Blocks.

601644 601645 Removing burrs

No. Dimensions (W x D x H) Mass g 1 Wipe any dust and oil films from the gauge block
and the Ceraston (or Arkansas stone) using a
601645 100 x 25 x 12 mm 110 solvent.
2 Place the gauge block on the Ceraston so that the
601644 150 x 50 x 20 mm 530 measuring face that has burrs is on the abrasive
surface of the stone. While applying light pressure,
move the gauge block to and fro about ten times
(Fig. 1). Use a block rubber for thin gauge blocks to
apply even pressure (Fig. 2).
3 Check the measuring face for burrs with an optical
flat. If the burrs have not been removed, repeat
step 2. If burrs are too large, they may not be
removed with an abrasive stone. If so, discard the
gauge block.

Note: The abrasive surface of a Ceraston must be
made flat by lapping it from time to time. After
lapping the ceraston, the lapping powder must be
completely removed from the surface of the stone
to prevent the gauge block from being scratched.
Mitutoyo does not offer Arkansas stones.

Maintenance Kit for Gauge Blocks Consumable spares

Series 516 No. Description
• Includes all necessary maintenance tools for daily care and storage of gauge blocks. 601645 Ceraston
• Supplied in a fitted wooden case for portable use. 600004 Tweezers
600005 Blower brush
600006 Cleaning paper
600007 Artificial leather mat
600008 Reagent bottle
600009D Gloves

No. Tools and accessories included

Ceraston (601645): Used for removing burrs on the measuring surface.
Tweezers (600004): Used for handling thin gauge blocks.

Blower brush (600005): Used for blowing dust off the measuring surface.
516-650E Cleaning paper (600006): Used for wiping off rust preventive oil and contamination.

Artificial leather mat (600007): Used as a gauge block mat.
Reagent bottle (600008): Bottle of wiping solution (100 mL).

Gloves (600009D)

410 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact

Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru