Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru Specifications ±0,3 µm
±0,03 µm
Laser Scan Micrometer Measuring Unit Linearity at 20°C * ±0,4 µm
Repeatability (±2 ) 1 x 2 mm
Series 544 Positional error * 650 nm, Visible
Measuring region 3200 scans/s
LSM-500S Laser wavelength 76m/s
Scanning rate IEC, FDA
High Accuracy Non-contact Measuring System Scanning speed
• Measuring range starting from 5 µm. Applicable laser standards
• Provides ultra-high accuracy with a linearity of ±0,3 µm over the entire measuring
Optional accessories
range (5 µm up to 2 mm).
• Ultra-high repeatability of ±0,03 µm. No. Description
• High scanning rate of 3200 scans/s 02AGD110 Calibration gauge set (0,1-2 mm)
02AGD200 Wire guiding pulley
02AGD220 Air shield
Air cleaner for air shield
957608 Extension signal cable 5 m
02AGN780A Extension signal cable 10 m
02AGN780B Extension signal cable 15 m
02AGN780C
LSM-500S
Inch/Metric
No. Range Resolution
(selectable)
544-532 0,005-2 mm / 0.0002-0.08" 0,00001-0,01 mm / 0.000001-0.0005"
Series 544 Specifications Entire range :
LSM-501S Linearity at 20°C * ± 0,5 µm
Narrow range :
High Accuracy Non-contact measuring system Repeatability (±2 ) ±(0,3+0,1D) µm
• Provides ultra-high accuracy with a linearity of ±0,5 µm over the entire measuring Positional error * ±0,04 µm
Measuring region ±0,5 µm
range (0,05 mm to 10 mm) and ±(0,3+0,1D) µm in the narrow range. 2 x 10 mm (0,05-0,1 mm)
• Ultra-High repeatability of ±0,04 µm. Laser wavelength 4 x 10 mm (0,1-10 mm)
• High scanning rate of 3200 scans/s Scanning rate 650 nm, Visible
Scanning speed 3200 scans/s
Applicable laser standards 113 m/s / 4450"/s
IEC, FDA
Optional accessories
LSM-501S No. Description
02AGD120 Calibration gauge set (0,1-10 mm)
Inch/Metric 02AGD210 Wire guiding pulley
02AGD400 Adjustable workstage
No. Range Resolution 02AGD440 Centre support
(selectable) 02AGD450 Adjustable V-block
02AGD230 Air shield
Air cleaner for air shield
957608 Extension relay cable 1 m
02AGC150A Extension signal cable 5 m
02AGN780A Extension signal cable 10 m
02AGN780B Extension signal cable 15 m
02AGN780C
02AGD440 and 02AGD450 : use with an adjustable workstage
544-534 0,05-10 mm / 0.002-0.4" 0,00001-0,01 mm / 0.000001-0.0005" * At the centre of the measuring region
* Potential measurement error due to variation in workpiece position
within the measuring region
D = Difference in diameter between the mastergauge and workpiece
Refer to the LSM brochure
438 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru