Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык

                   для размещения заказа - mitutoyo@mitutoyo-tools.ru

Overlay Chart Set

Group 1                                                                                                  Specifications  10X : 0,1 mm / 0.005"
                                                                                                         Grid divisions  20X : 0,05 mm / 0.0025"
For profile projectors                                                                                                   50X : 0,02 mm / 0.001"
• These standard overlay charts increase the range of application and the efficiency of Mitutoyo                         100X : 0,01 mm / 0.0005"

  profile projectors.
• The charts are supplied in the sizes 250, 300, 340, 500 and 600 mm to suit the screens of Mitu-

  toyo projectors. A large range of scales and profiles is provided that enables workpiece features
  to be tested quickly and easily. Length, height, parallelism, angle, radius, taper, bore position,
  diameter, as well as all standardized thread and tooth profiles can be tested.
• All charts are made of a distortion-free special plastics compound and are provided with a pro-
  tective coating.

 Radius/protractor chart                                                                                 Radius/protractor chart
 Angle : Divisions at 1° and 30' intervals at 7" diameter increasing to 15' intervals at 11" diameter.   Grid/protractor chart
 Features : Ideal for checking diameters, concentricity of diameters, radii, angles and cams             Combination chart
No. Diameter
201383* 250 mm
201387 300 mm
201393 340 mm
512622 500 mm
511844 600 mm
999281UK 10"
999282UK 12"
999283UK 14"
999284UK 20"
999285UK 24"

 Grid/protractor chart
 Angle : 15° increments
 Features : Ideal for checking diameters, concentricity of diameters, radii, angles and cams.
No. Diameter
201380 250 mm
201386* 300 mm
201392 340 mm
512621* 500 mm
511843* 600 mm
999286UK 10"
999287UK 12"
999288UK 14"
999289UK 20"
999290UK 24"

 Combination chart
 Angle : Divisions at 10° and 30' intervals at 7" diameter increasing to 15' intervals at 11" diameter.
 Features : All purpose chart for checking diameters, angles, radii and linear divisions
No. Diameter
512651* 250 mm
512652 300 mm
512653* 340 mm
512654 500 mm
512655* 600 mm
999291UK 10"
999292UK 12"
999293UK 14"
999294UK 20"
999295UK 24"

                   524  The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
                        for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
                        without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact

                        Mitutoyo for more information on delivery times.
                         mitutoyo@mitutoyo-tools.ru

                             www.mitutoyo-tools.ru