Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Roundtest RA-2200
Series 211 - Form Measuring Instrument Specifications
All models are equipped with a highly accurate turntable that enables simple and accurate center- Rotational accuracy (0,02+3,5H/10000) µm
ing and levelling of the workpiece, which account for the majority of the essential setup work for
e.g. measuring roundness/cylindricity. radial H : Measuring height with
Wide variety of models available to suit any application.
• RA-2200AS/AH reference to turntable surface
The models are supplied as standard with an automatic centering and leveling turnable, freeing
the operator from the centering and leveling task. (mm) JIS B7451-1997
• RA-2200DS/DH
The models are supplied as standard with a navigation function that quickly and simply guides the Rotational accuracy (0,02+3,5X/10000) µm
operator through the centering and levelling task, as though the task were being performed by an
expert. axial X : Radial distance with
Highly accurate and easy-to-use turntable
With extremely high rotational accuracy, both in the radial and axial directions, the turntable al- reference to rotational center
lows high accuracy flatness testing to be perfomed in addition to roundness and cylindricity meas-
urements. (mm)
Incorporating an Automatic Adjustment Table (AAT), the top-of-the-line RA-2200AS/AH models Rotational speed 2, 4, 6, 10 rpm
relieve the operator of workpiece centering and levelling.
Max. probing diameter 300 mm
A guidance system (DAT) is incorporated into the turntables on the RA-2200DS/DH models to
help the operator perform manual centering and levelling smoothly and simply. Max. workpiece 580 mm
diameter
Max. turntable loading 30 kg
Vertical column 0,10 µm/100 mm
(Z-axis)
Straightness (over DS: 0,15 µm/300 mm - DH :
narrow range) 0,25µm/500 mm
Straightness (over DS: 0,7 µm/300 mm - DH:
wide range) 1,2µm/500 mm
Parallelism with Max. 50 mm/s (Measurement :
rotation center 0,5, 1, 2, 5 mm/s)
Positioning speed DS: 300 mm - DH : 500 mm
over 32 : 85 mm (with
Max. probing height standard stylus), over 7 : 50
Max. probing depth mm (with standard stylus)
Horizontal arm 0,7 µm/150 mm
(X-axis) 1 µm/150 mm
Straightness
Perpendicularity to 175 mm (-25 mm to 150 mm)
rotation center Max. 30 mm/s (Measurement
Traverse range 0,5, 1, 2, 5 mm/s)
Positioning speed 1,6 mm tungsten carbide
0.39 MPa
Stylus 30L/min. (standard state)
Air pressure 10-50mN (5-level switching)
Air consumption ±400 µm/± 40 µm/± 4µm
Measuring force (±5mm: tracking range)
Measuring range
Power supply 100-240 VAC, 50/60 Hz
Mass 180 kg (DS main unit), 200 kg
(DH main unit)
RA-2200
ROUNDPAK
Simple to operate even with a full set of parameters
and analysis functions.
568 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru