Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Micro-Vickers Hardness Testing Machines
HM-101/102/103/112/113
Specifications 98.07 / 245.2 / 490.3 / 980.7 / Series 810
Test force range 1961 / 2942 / 4903 / 9807 mN
1% (forces less than 9.807 mN • The load time can be set in 1 second increments between 5 and 99 seconds (HM-112 / 113).
Loading accuracy are ignored) • A measuring resolution of 0,01 µm is provided that allows small indentations to be measured
Automatic (load, dwell, unload)
Load control Stage size : 100 x 100 mm with high precision.
XY stage Travel range : 25 x 25 mm, with • Hardness tester according to DIN EN ISO 6507 and JIS B7725.
micrometer heads • Micro-Vickers hardness tester with Vickers test from HV 0.01 - HV 1.
Graduation Resolution : • Up to 3 objectives can be connected that can all be used for indent measurement (except
Max. specimen HM-101 / 102 / 103 = 0,01 mm
height HM-112 / 113 = 0,001 mm HM-101).
Max. specimen 0,01 mm • A Knoop indenter can also be connected.
depth • Manual lens system switch.
Observation by 95 mm
Indenter / 150 mm (from the centre of the
Objective turret indenter shaft)
Lens system Micrometer eyepiece
Magnification
Optical path Manual type
Data output 10X, 50X
100X, 500X
Power supply 2-way (measurement / exposure)
Dimensions RS-232C, Digimatic code (SPC)
(W x D x H) and Centronics
Mass (main unit) 100/120/220/240V AC, 50/60Hz
410 x 600 x 590 m
42 kg
Standard accessories
No. Description HM-112
810-617 Objective 10X Digital display of measurement results
810-619 Objective 50X
810-011 Rotary table and a statistical calculation function
810-074 XY Stage (digital type)
810-016 Vice, max. 45mm groove width
19BAA058 Diamond indenter low force
19BAA109 Dust protection cover
Hardness test block 700 HV0.3 is standard accessory.
Optional accessories HM-101
Economical manual type
No. Description
810-017 Vice, max. 100mm groove width Model HM-101 HM-102 HM-103 HM-112 HM-113
810-018 Rotary table No. 810-124D 810-125D* 810-959D* 810-126D 810-969D*
810-019 Special vice, swivelling groove width 37 810-124E 810-125E 810-859E 810-126E 810-969E
mm No. UK only 5-30 sec 5-99 sec
810-013 Thin plate holder Load dwell time 5-60 sec 5-60 sec Touch-screen 5-99 sec
810-014 Wire holder horizontal - Membrane Membrane Touch-screen
810-015 Wire/ball holder vertical Control unit switch type switch type type
810-020 Universal specimen holder up to 30 mm - - type
810-084 Rotary universal specimen holder Video monitor 1 - 9" B&W 1 9" B&W
810-085 Adjustable thin plate holder, sheet Indenter mounts 1 (observation, 1 1
metal length 56 mm 1 (measurement) 2 (measurement) 1
810-012 50 x 50 mm travel XY stage Objective mounts 0,2 µm 2 (measurement) 2 (measurement)
810-641 Vibration damping stand 0,1 µm 2 (measurement)
Objectives Resolution at Vickers table 0,1 µm 0,1 µm via "Touch
810-616 Objective 5X Reading of hardness 0,1 µm
810-618 Objective 20X at Vickers table at Vickers table Screen" via "Touch
810-620 Objective 100X values
Screen"
For a list of available hardness testing blocks and computing tools, refer to
the HM-211/221 page.
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended 587
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times. mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru