Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Wizhard Rockwell, Rockwell Superficial, Brinell
Hardness Testers HR-500 Series
Series 810 Specifications 29.42 N, 98.07 N
Rockwell Superficial
• Multiple test force generation for Rockwell, Rockwell Superficial and Brinell hardness. Preload force 147.1 / 294.2 / 441.3 N
• Dolphin-nose indenter arm for easy reach of interior (min. 40 mm / 22 mm, when using Test force Rockwell
588.4 / 980.7 / 153.2 / 245.2 / 294.2 N
an optional diamond indenter) and exterior surfaces. Brinell (1)
• Real-time electronic test force control for accurate loading. This perfectly eliminates load force 61.29 / 98.07 / 153.2 / 245.2 / 294.2 /
306.5 / 612.9 / 980.7 / 1226 / 1839 N
overshoot.
• Indenter escape function for continuous testing at fixed table position. This eliminates instability (1) HR-511, HR-522 : 1839 N only
caused by table retraction. Test force setting By control unit
• Auto-stop table elevation and automatic preloading provide stable test force generation.
Load control Automatic (load, dwell, unload)
Load dwell time 0-120 s (1 s increments)
Max. specimen 205 mm (for standard flat anvil)
height 150 mm (from the centre of the
Max. speciment indenter shaft)
depth Minimal bore diameter : 35 mm
Internal (22 mm with a special indenter)
diameter
Measurement HV, HK,
Conversion to HRA, HRB, HRC, HRD, HRF, HRG,
other hardness HR15T, HR30T, HR45T,
HR15N, HR30N, HR45N,
scales (2) HS, HB, HBS, tensile strength
(2) except HR-511
Statistical All models : Number of values,
functions Max., Min., Average value, Range,
Upper and lower limit, Standard
HR-511 HR-521 deviation, Number of GO/NG
evaluations, Storage of 1024 values,
OFFSET, Hardness value, Test
condition, Continuous measurement.
HR-521/2/3 : X-R control card,
Editing of 1024 values, Hardness
conversion value, Statistical results,
Cylindrical, spherical and multipoint
correction.
Data output RS-232C, Digimatic code (SPC) and
Power supply Centronics
100/120/220/240V AC, 50/60Hz
Dimensions Main unit
(W x D x H) 250 x 670 x 605 mm
Control unit
Mass (main unit) 165 x 260 x 105 mm
65 kg
Accessories For a detailed list of standard and
optional accessories, refer to the
HR-523 following page.
Model HR-511 HR-521 HR-522 HR-523
No. 810-208D 810-202D 810-203D 810-204D
810-208-01E 810-202-01E 810-203-01E 810-204-01E
No. UK only Membrane switch type Touch-screen type Touch-screen type Touch-screen type
Control unit Manual (with Manual (with Manual (with
automatic brake) automatic brake) automatic brake) Power drive
Stage elevation Manual Manual Fully automatic
Fully automatic
Table movement - - -
Tolerance evaluation
590 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru