Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Micro Zone Test System MZT-500
Series 810 Specifications Electrical
• When it comes to evaluating mechanical properties of ultra-small regions of ultra-fine speci- 0.1-1000 mN
Test force (HV) Vickers and (HK) Knoop
mens, the MZT-500 Series are exceptionally powerful tools in the fields of research, generation 0.916 µN
development and quality control. The MZT-500 can evaluate mechanical properties that conven- Test force range 0.01-100 mN/s
tional hardness testing machines cannot measure, such as hardness of ultra-fine cross-sections, Hardness test
mechanical bonding properties and wear properties of carbon fibres, glass fibres, etc., on speci- Control resolution
mens such as CVD- and PVD-deposited or generated films, including ion-plated films. Loading speed
• The indentation factor can be obtained, which is related to the hardness value (partially) shown
in Martens hardness test (ISO14577) and Young's modulus. Deformation characteristics in the Indentation Range : 0-20 µm
load, dwell, and unload phases are also obtainable for use in determining properties of the depth Resolution : 0,1 nm
specimen material. measurement
810-813D Indenter type Bercovici triangular pyramid
indenter
Sample surface - Camera
observation 1/3 inch B&W (410,000 pixels)
method - Objective (monitor
magnification)
100X (2500X)
- Optional
10X (250X) ; 40X (1000X)
XY stage travel Manual Type : 25 x 25 mm
range Automatic : 50 x 50 mm
Max. specimen 90 mm
height 90 mm (from the centre of the
Max. specimen indenter shaft)
depth
Test type - Indentation test (with and
without preload force)
- Indentation depth setting test
- Continuous indentation test
- Repeated indentation test
Vibration isolation The balance-lever vibration
isolation mechanism reduces the
effect of external vibrations on
measurements.
Protection Field-compatible form with cover
for protection against dust and
wind.
Model MZT-500L MZT-500P
No. 810-813D* 810-814D*
810-813E 810-814E
No. UK only
Basic system - -
Data analysis / control
device
Manual type XY stage
Automatic XY stage
594 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru