для размещения заказа - mitutoyo@mitutoyo-tools.ru
UKAS Certified Calibration Blocks
Calibration blocks Micro-Vickers with UKAS certification
Micro-Vickers calibration blocks are 30 mm diameter x 15 mm thick.
For all orders, the reference of the calibration blocks is to be quoted as follows : Example : for an
HV5 block with a hardness value of 350, the reference is H350HMV0.1
These calibration blocks are valid for all the following hardness value : 40 – 70 – 100 –150 – 200 –
250 – 300 – 350 – 400 – 450 – 500 – 550 – 600 – 700 – 750 – 800 – 850 – 900.
All calibration blocks are supplied within a hardness tolerance of ±25 HV.
No.
HMV0.010*
HMV0.025*
HMV0.05*
HMV0.1*
Calibration blocks Vickers with UKAS certification
Vickers calibration blocks are the follwing size : 64 mm x 15 mm (thickness).
For all orders, the reference of the calibration blocks is to be quoted as follows :
Example : for an HV5 block with a hardness value of 350, the reference is H350HV5
These calibration blocks are valid for all the following hardness value : 40 – 70 – 100 – 150 – 200 –
250 – 300 – 350 – 400 – 450 – 500 – 550 – 600 – 700 – 750 – 800 – 850 – 900.
All calibration blocks are supplied within a hardness tolerance of ±25 HV.
No.
HV0.2*
HV0.3*
HV0.5*
HV1*
HV2*
HV3*
HV5*
HV10*
HV20*
HV30*
HV50*
HV100*
Penetrators
No. Designation
HPHR* Standard Rockwell penetrator, 120° diamond cone
HPHRWIZ* Rockwell penetrator, 120° diamond cone (special H: 5 mm for Wizhard)
HPB1/16* Rockwell penetrator, steel ball, diameter 1/16”
HPB1/8* Rockwell penetrator, steel ball, diameter 1/8”
HPB1/4* Rockwell penetrator, steel ball, diameter 1/4”
HPBW5* Brinell penetrator, carbide ball, diameter 5 mm
HPB1/2* Rockwell penetrator, steel ball, diameter 1/2”
HB1/16* Set of 10 steel balls, diameter 1/16”
HB1/8* Set of 10 steel balls, diameter 1/8”
HB1/4* Set of 10 steel balls, diameter 1/4”
HB1/2* Set of 10 steel balls, diameter 1/2”
HPBW1* Brinell penetrator, carbide ball, diameter 1 mm
HBW1* Replacement carbide ball, diameter 1 mm
HBW2.5* Replacement carbide ball, diameter 2,5 mm
HBW10* Replacement carbide ball, diameter 10 mm
HPBW10* Brinell penetrator, carbide ball, diameter 10 mm
HPBW2.5* Brinell penetrator, carbide ball, diameter 2,5 mm
HBW5* Replacement carbide ball, diameter 5 mm
HBW1/16* Rockwell penetrator, carbide ball, diameter 1/16”
HBW1/8* Rockwell penetrator, carbide ball, diameter 1/8"
HBW1/2* Rockwell penetrator, carbide ball, diameter 1/2"
HBW1/4* Rockwell penetrator, carbide ball, diameter 1/4"
HPHK* Knoop identer
HPHV* Vickers identer
600 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru
