Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Tube Micrometer
Specifications Refer to the list of specifications Series 115
Accuracy 0,01 mm, 0.001" or 0.0001" • For measurements of all curved surfaces and wall thickness of tubes, bearings, rings, etc.
Graduation Thimble and sleeve satin chrome
Scales finish, 18 mm 115-215
Carbide tipped, micro-lap finish
Measuring (115-1XX, 115-2XX)
surfaces Spindle: carbide tipped,
micro-lap finish
Frame Anvil: hardened steel (115-3XXX)
Measuring Enamelled
spindle 6,35 mm, spindle pitch 0,5 mm with
Measuring spindle lock
force 5-10 N/3-8 N (Type A, B, C, D)
Delivered
Including box, setting standard (from
25 mm upward), key
Metric Model with spherical anvil
No. Range Accuracy D mm Mass g
115-115 0-25 mm ±3 µm 10 180
115-116 25-50 mm ±3 µm 11 240
115-117 50-75 mm ±3 µm 17 315
115-118 75-100 mm ±4 µm 18 375
Metric Model with spherical anvil and spindle face
No. Range Accuracy D mm Mass g
115-215 0-25 mm ±3 µm 10 180
115-216 25-50 mm ±3 µm 11 240
115-217 50-75 mm ±3 µm 17 315
115-218 75-100 mm ±4 µm 18 375
Metric Model with cylindrical anvil
Type A (Pin) No. Range Accuracy L mm D mm Remarks Mass g
115-302 0-25 mm ±3 µm 4 2 Type A 180
115-308 0-25 mm ±3 µm 4 3.6 Type B 180
115-315 0-25 mm ±3 µm 12 4.8 Type C 180
115-316 0-25 mm ±3 µm 22 8.2 Type D 180
115-303 25-50 mm ±3 µm 4 2 Type A 240
115-309 25-50 mm ±3 µm 4 3.6 Type B 240
Type B (Spherical) Inch Model with spherical anvil
No. Range Accuracy D" Mass g
115-153 0 - 1"(1) ±0.00015" 0.4 180
(1)reading 0.0001" is obtained with vernier
Inch Model with spherical anvil and spindle face
No. Range Accuracy D" Mass g
115-253 0 - 1"(1) ±0.00015" 0.4 180
115-242 1 - 2" ±0.00015" 0.44 240
115-243 2 - 3" ±0.00015" 0.67 315
(1)reading 0.0001" is obtained with vernier
Type C (Cylindrical) Inch Model with cylindrical anvil
No. Range Accuracy L mm D mm Remarks Mass g
115-305 0 - 1" 180
115-313 0 - 1"(1) ±0.00015" 4 2 Type A 180
115-314 0-1"(1) 180
±0.00015" 12 4.8 Type C
±0.00015" 22 8.2 Type D
(1)reading 0.0001" is obtained with vernier
Type D (Cylindrical)
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended 71
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times. mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru