Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Micrometer Heads Functions
SERIES 350 – Digimatic Micrometer Head Origin point setting (ABS measurement system):
Resets the ABS origin at the current spindle position to the
• The Digimatic output port enables inclusion in a statistical process control or networked measurement minimum value of the measuring range and switches to ABS
system. mode.
B Zero setting (INC measurement system):
A brief press on the ZERO/ABS button sets display to zero at
350-351-10 350-352-10 the current spindle position and switches to the incremental
(INC) measuring mode. A longer press resets to the ABS
SPECIFICATIONS measuring mode.
Inch/Metric Auto power ON/OFF:
The reading on the LCD disappears after this instrument is
Code No. Range Resolution Accuracy* Stem type Price idle for about 20 minutes, but the reading and measurement
0.001 mm (.00005") ±2 µm (±.0001") Plain 220.00 mode are retained. Turning the spindle causes the reading on
350-351-10 0-25 mm (0-1") 260.00 the LCD to reappear.
350-352-10 Locknut
Unit: mm Data output:
* Excluding quantizing error. Models equipped with this function have an output port for
transferring measurement data to a Statistical Process Control
DIMENSIONS (SPC) system.
42 114.5 Error alarm:
(17) (139.5) In the unlikely event of a display overflow or calculation
15 error, an error message is displayed and measurement stops.
Measurement cannot continue until the error is corrected.
Also, if the battery voltage drops below a certain point, the
battery indicator will turn on before measurement becomes
impossible, warning the user that the battery needs to be
replaced.
Optional Accessories
05CZA662: SPC data cable with pushbutton (1 m)
58.50
05CZA663: SPC data cable with pushbutton (2 m)
70.40
06ADV380B: USB Input Tool Direct USB-ITN-B (2 m)
106.00
02AZD790B: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140B: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
119.00
350-351-10
6.35 58
010 18
-0.009
( ): when retracting the spindle until its stroke end.
350-352-10 42 114.5
(139.5)
(17)
6.35 15
14 4
M9.5x0.5 58
18
( ): when retracting the spindle until its stroke end.
B-83 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru