Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Bore Gauges Technical Data
SERIES 511 – ABSOLUTE Digimatic Bore Gauge Accuracy*: 3 m/.00012"
Repeatability: 2 m/.00008"
• This ABSOLUTE Digimatic bore gauge is Narrow-range accuracy: 2 m/.00008"
exclusively designed for inside diameter Scale type: ABSOLUTE electrostatic linear encoder
measurement. Max. response speed: Unlimited
• Up to four extension rods (250 mm or 500 mm) Battery: SR44 (2 pcs.), 938882
can be used for measuring at the bottom of a Battery life: Approx. 2000 hours under normal use
hole 2 m deep.
• The display and grip can be rotated up to 320 * Excluding quantizing error
and the display can be inclined up to 90, so that
it is easily readable from any direction. Functions
• The minimum value holding function provides
easy measurement of hole diameter. Presetting, Preset, Power on/off, inch/mm conversion
• Interchangeable washers are supplied as standard (inch/mm type only), Data output, GO/±NG tolerance
C accessories to enable setting in small steps. judgement Min value holding, Data hold
• Setting the Bore Gauge to a master value using a Alarm: Low battery voltage, scale contamination, overflow
gauge block set allows quick and accurate error, tolerance limit setting error
setting.
• A Bore Gauge Checker and a range of Setting Optional Accessories
Rings are available to aid in accurately setting a
gauge before making a measurement. 21DZA089: Extension rod 250 mm (10")
274.00
511-521 21DZA081: Extension rod 500 mm (20")
249.00
516-118-10: Setup metric rectangular gauge block set
POA
905338: SPC data cable (1 m)
32.90
905409: SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
With optional extension rods
SPECIFICATIONS
Inch/Metric
Code No. Range Measuring force Resolution Anvils Probing depth Price
511-521 45-100 mm/1.8-4.0" 5N or less 0.001 mm/ 780.00
511-522 100-160 mm/4.0-6.5" 12 pcs. 150 mm/6" 870.00
.0005" 13 pcs.
DIMENSIONS
rota3t2io0n° 29.4 Unit: mm
9in0c°lination Setting the Bore Gauge to a master
RESET value using a gauge block set.
M/W 22
61 M1
M2
M3
DATA/HOLD ON/OFF in/mm
TOL.
PRESET
START
rota3t2io0n° 100 Extension rod
150
28 M26x1.5
(339.5)
30 232 (482) 16.5
268.5 (518.5)
30 28 250 (500)
150
SR 2 20
SR 2 1.5
28
9 ( ): 500 mm type
C-37 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru