Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Calipers
SERIES 552 – ABSOLUTE Digimatic Coolant Proof Carbon Fibre Caliper
• A lightweight Digimatic caliper that uses CFRP • Data output function allows integration into Technical Data
(Carbon Fibre Reinforced Plastics) in the beam statistical process control and measurement
and jaws. systems. Scale type: ABSOLUTE electromagnetic induction
• Interchangeable measuring jaws available as
optional accessories. linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 5,000 hours in continuous use
Dust/water
protection level: IP66*3
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
*3 Rustproofing treatment to be applied after use.
• Dust-tight and water1 Functions
protected IP66
000000716 E ABSOLUTE system measurement:
E After power is turned ON, measurement can be started
D without zero-setting if origin-setting was previously
performed. The ABS (absolute) origin position can be changed
552-312-10 by the ORIGIN button.
SPECIFICATIONS Zero-setting (INC measurement mode):
Displayed value can be set to zero at any arbitrary position of
Inch/Metric the slider for comparative measurements.
Code No. Range*1 Resolution Accuracy*2 Price Auto ON/OFF:
0.01 mm/.0005" 728.00 The reading on the LCD disappears after this instrument is idle
552-312-10 0 (20)-450 mm/0 (.5")-18" ±0.04 mm/±.002" 756.00 for a short time, but the origin point is retained. Moving the
1220.00 slider causes the reading on the LCD to reappear.
552-313-10 0 (20)-600 mm/0 (.5")-24" ±0.05 mm/±.003" 1430.00
±0.09 mm/±.004" 1880.00 Data output:
552-314-10 0 (20)-1000 mm/0 (1")-40" ±0.12 mm/±.005" Models equipped with this function have an output port for
Unit: mm transferring measurement data to a Statistical Process Control
552-315-10 0 (20)-1500 mm/0 (1")-60" (SPC) system.
552-316-10 0 (20)-2000 mm/0 (1")-80" Data hold:
By using the data hold unit (option), the displayed value can
*1 ( ): Minimum dimension in inside measurement. be held. This cannot be used with the data output function.
*2 Excluding quantizing error.
Presetting (ABS INC measurement mode):
DIMENSIONS Displayed value can be set to any arbitrary value.
A Offsetting:
DF Automatically adds the thickness of the inside jaws to the
measured value so that the result can be read directly, without
calculation.
Inch/mm selection:
Switches the units of measurement (at any time).
Alerts:
In the unlikely event of a display overflow or calculation
error, an error message is displayed and measurement stops.
Measurement cannot continue until the error is corrected.
If the battery voltage drops below a certain point, the
battery indicator will turn on before measurement becomes
impossible, warning the user that the battery needs to
be replaced. If contamination on the surface of the scale
causes a calculation error, an error message is displayed and
measurement stops.
C
B
H
L L
G
K
J
Range ABCDE FGH J K L
0-450 mm 640 100 18 41.2 25 91.8 35 65 6.35
0-600 mm 790
0-1000 mm 1230 A 8 R10
0-1500 mm 1740 150 24 62D.8 32 113.8 F45 100 12.7
0-2000 mm 2250
D-19 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
B
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru