Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Digimatic Indicators
SERIES 543 – ABSOLUTE Digimatic Indicator ID-CX
• Employing the ABSOLUTE Linear Encoder, the • Tolerance-judging measurement is available by Technical Data
ID-CX indicator always displays the absolute setting upper and lower limit values. The
position of the plunger from the origin at power- tolerance judgement result can be enlarged. Display: 6-digit LCD and sign
on. • Equipped with a data output port that enables
incorporation into measurement networking and Scale type: ABSOLUTE electrostatic linear
• Thanks to the ABSOLUTE Linear Encoder, statistical process control systems.
reliability has been increased due to elimination encoder
of over-speed errors.
Max. response speed: Unlimited (measurement by
scanning cannot be performed)
Stem dia.: 8 mm
Standard contact point: 901312
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 7,000 hours under normal
use
Dust/water protection
level: IP42
Functions
Preset, Zeroset, GO/±NG judgement, Counting direction
switching, Power ON/OFF, Simplified calculation, Function
lock, Data hold, Data output, inch/mm reading
Alarm: Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error
Optional Accessories
905338: SPC data cable (1 m)
32.90
905409: SPC data cable (2 m)
36.80
F 02AZD790F: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
21EZA198: Plunger lifting lever (12.7 mm/.5" type)
5.10
543-391B 21EZA105: Plunger lifting knob (12.7 mm/.5" type)*1
10.90
543-471B 21EZA197: Plunger lifting knob (25.4 mm/1" type)
39.50
21EZA200: Plunger lifting knob (50.8 mm/2" type)
38.00
540774: Plunger lifting cable (12.7 mm and 25.4 mm)
20.50
543-491B 02ACA571: Auxiliary plunger spring (25.4 mm/1" type)*2
5.10
02ACA773: Auxiliary plunger spring (50.8 mm/2" type)*2
5.40
264-504-5E: Digimatic Mini-Processor DP-1VR
342.00
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Interchangeable backs (refer to page F-41 for details)
Measuring stands (refer to pages F-70 to F-73 for details)
SPECIFICATIONS *1 Not available for low measuring force models.
*2 Required when orienting the indicator upside down.
Inch/Metric
Code No. Range Overall*1 Hysteresis*1 Repeatability*1 Measuring force Remarks Price
Resolution: .0005"/.0001"/.00005"/0.01 mm/0.001 mm 253.00
293.00
543-391B .5"/12.7 mm 1.5N or less — 364.00
394.00
543-395B .5"/12.7 mm .0001"/ .0001"/ .0001"/ 0.4N - 0.7N Low measuring
543-471B 1"/25.4 mm 0.003 mm 0.002 mm 0.002 mm force 198.00
289.00
1.8N or less*2 —
543-491B 2"/50.8 mm .0002"/ 2.3N or less*2 —
0.005 mm
Resolution: .0005"/0.01 mm
543-401B .5"/12.7 mm .001"/ .001"/ .0005"/ 0.9N or less —
543-475B 1"/25.4 mm 0.02 mm 0.02 mm 0.02 mm 1.8N or less*2 —
*1 Quantizing error of ±1 count is excluded.
*2 Plunger direction is up to direction in which plunger is horizontal.
F-9 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru