Mitutoyo - Полный каталог инструмента - 2014 Английский язык

                                                 для размещения заказа - mitutoyo@mitutoyo-tools.ru

Dial Indicators

SERIES 2 – 0.001 mm and 0.005 mm Graduation Dial Indicators

•	Standard 0.001 mm and 0.005 mm graduation            •	The plunger is made of high-strength quench                                              2113S-10
	 dial indicators having a bezel with an outside       	 hardened stainless steel which resists arduous
	 diameter of 57 mm. All types come with limit         	 use.
	 markers and a bezel clamp.                           •	A carbide contact point is used.
•	The outer clamp and lifting lever (optional) can     •	A special alloy is used for the sector gears to
	 be attached to either the right or left side. These  	 provide improved wear resistance.
	 parts can be easily installed and removed without    •	The indicator uses jewelled bearings, providing
	 tools.                                               	 excellent indication sensitivity and durability.
•	Secure adhesion between the bezel and crystal as     •	Application of a hard coating on the surface of
	 well as the use of an O-ring prevents water or oil   	 the crystal makes it highly resistant to scratching
	 penetration.                                         	 and chemical attack.

                                                                                                                                        2124S-10

F

                                                                                   2110S-10

                     2109S-10                                                                                2119S-10

SPECIFICATIONS

Metric

Code No. Graduation    Range                       Accuracy                                  Repeat-  Scale  Measuring           Price
                     (range/rev)     Overall Retrace 1/10 rev 1 rev                          ability           force
                                                                                                                               67.50
2109S-10              1 mm (0.2 mm)  5 µm  2 µm        2 µm    4 µm                                    0-100-0 1.5 N or less   82.80
2110S-10  0.001 mm 1 mm (0.1 mm)                                                             0.5 µm ±0-100 2.0 N or less      106.00
2110S-70                                                                                                                       74.80
                                                                                                                               92.90
2113S-10             2 mm (0.2 mm) 7 µm                        5 µm                          1 µm 0-100-0 1.5 N or less        64.00
                                                               6 µm                          3 µm ±0-50
2119S-10             5 mm (0.2 mm) 10 µm   3 µm        3.5 µm  9 µm
                                                        5 µm
2124S-10 0.005 mm 5 mm (0.5 mm) 12 µm

                                           F-25                                   Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
                                                                                                                Therefore the company reserves the right to change any or all aspects of any product specification without notice.

                                                       mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru