Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Optional Accessories
For Quick Vision Measuring Systems
Objectives
Objective Code No. Working distance Objective Turret lens mag. Monitor mag. Field of View
15X 12.54 x 9.4
QV-SL0.5X 02AKT199 30.5 mm 1X 30X 6.27 x 4.7
90X 2.09 x 1.56
QV-HR1X 02AKT250 40.6 mm QV-SL0.5X 2X 30X 6.27 x 4.7
60X 3.13 x 2.35
QV-SL1X 02ALA150 52.5 mm 6X 180X 1.04 x 0.78
QV-HR2.5X 02AKT300 40.6 mm 75X 2.5 x 1.88
QV-HR1X 1X 150X 1.25 x 0.94
QV-SL2.5X 02ALA170 60 mm QV-SL1X 2X 450X 0.41 x 0.31
QV-5X 02ALA420 33.5 mm 6X 150X 1.25 x 0.94
300X 0.62 x 0.47
QV-HR10X 02AKT650 20 mm QV-HR2.5X 1X 900X 0.20 x 0.15
QV-SL2.5X 2X 300X 0.62 x 0.47
QV-10X 02ALG010 30.5 mm 6X 600X 0.31 x 0.23
QV-25X 02ALG020 13 mm 1800X 0.10 x 0.07
1X 750X 0.25 x 0.18
1500X 0.12 x 0.09
The monitor magnification and field of view values apply to QV-5X 2X 4500X 0.04 x 0.03
PRO models only.
QV-10X, QV-25X: Depending on the workpiece, 6X
the illumination may be insufficient at a turret lens
magnification of 2X and 6X. QV-HR10X 1X
QV-25X: The PRL illumination is restricted in its usable QV-10X 2X
positioning. 6X
1X QV Indexing Head
Automatic multi-plane measurement is possible
QV-25X 2X with the optional indexing head.
6X
Calibration & Compensation Charts
These glass charts are used to compensate for
differences in the pixel size of the CCD chip,
autofocus accuracy and the optical axis offset at
each magnification of the Programmable Power
Turret (PPT).
Laser Auto Focus Function* Objective QV-HR2.5X Max. workpiece diameter 140 mm
The system can be equipped with the Laser Auto Measurement principle Double pinhole method Max. workpiece mass 2 kg
Focus unit that allows stable, high-speed height Laser spot diameter Min. rotation angle 0.1°
measurement. The double pinhole method used Repeatability 3 µm Positioning accuracy ±0.5°
in the detection system minimises dependence on s = 0.4 µm Max. rotation speed 10 rpm
surface inclination.
*Available for specific models.
K RGB Colour Filtering Unit
The colour filtering function can be added to the
Coaxial laser auto-focus vertical reflected illumination or programmable
ring light in Quick Vision models that use a
Detector a Detector b halogen light source. This function enhances the
Pinhole visibility of low-reflection surfaces on coloured
Pinhole workpieces, facilitating reliable edge detection.
Half-reflecting This function can also be retrofitted to a
mirror conventional Quick Vision model. In addition,
Lens a yellow filter enables vision measurement in
the yellow light region, which provides high
sensitivity.
Objective Example: Height of leads from a QFP package
Laser Beam Safety Precautions Red filter used
This system uses a low-power visible laser beam which
corresponds to a CLASS 1 (visible radiation) of IEC 60825 for
measurement. The CLASS 1 laser warning label as shown below
is attached to the main unit.
K-15 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru