Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Surftest Extreme SV-3000CNC
SERIES 178 – CNC Surface Roughness Testers
• A highly accurate measuring instrument that allows CNC measurement of surface roughness and fine Technical Data
contour.
• Each axis has a maximum drive speed of 200 mm/s, permitting high-speed positioning for increased X1 axis
throughput of multiple-profile/multiple-workpiece measurement tasks. Measuring range: 200 mm
• For models equipped with the axis, it is possible to perform continuous measurement over horizontal Resolution: 0.05 m
and inclined surfaces by power-tilting the drive unit. Scale: Reflective-type linear encoder
• For models with the Y-axis table, it is possible to expand the measuring range for multiple workpieces, Drive speed: Max. 200 mm/s (CNC)
etc., through positioning in the Y-axis direction. 0 - 60 mm/s (joystick)
• With optional rotary tables for axes q1 and q2, designed for use with the CNC models, it is possible to Measuring speed: 0.02 - 2 mm/s
expand the CNC measurement application range. Traverse straightness: 0.5 m/200 mm
• Inclined plane measurement is possible through simultaneous control of the X1 and Z2-axes. a axis
• The Z1 axis incorporates an anti-collision safety device to automatically stop the detector unit if it Inclination angle: -45° to +10°
collides with a workpiece or jig. Resolution: 0.000225°
• An easy-to-operate Remote Box enables the user to make any movement by selecting the required axis Rotation speed: 1 rpm
using the two joysticks. The current axis selection is easily identified by the icon on the key top. Z2 axis (column)
• Communication with the Data Processing/Analysis section is via USB. Vertical travel: 300 mm (500 mm)*
Resolution: 0.05 m
Surftest Extreme SV-3000CNC Scale: Reflective-type linear encoder
Drive speed: Max. 200 mm/s (CNC)
0 - 60 mm/s (joystick)
Base size (WxD): 750 x 600 mm
Detector
Range / resolution: 800 m/0.01 m, 80 m/0.001 m,
8 m/0.0001 m
Measuring force: 4 mN (178-397-2)
0.75 mN (low force type 178-396-2)
Stylus tip: Diamond, 90/R5 m
(60/R2 m: low force type)
Dimension (WxDxH): 800 x 651 x 1000 mm
(800 x 651 x 1200 mm)*
Mass: 240 kg (250 kg)*
* Tall-column model
Optional Accessories
Vibration isolation stand
Vibration isolation
mechanism: Diaphragm air spring
Natural frequency : 2.5 - 3.5 Hz
Damping
mechanism: Orifice
Levelling mechanism: Automatic control with mechanical
valves
Air supply pressure: 0.4 MPa
Allowable loading
capacity: 350 kg
Dimension (WxDxH): 1000 x 895 x 715 mm
Mass: 315 kg
Y-axis table unit
Measuring range: 200 mm
Resolution: 0.05 m
Scale unit: Reflective-type linear encoder
Drive speed: 200 mm/s (max., CNC)
0 - 60 mm/s (joystick)
Maximum loading
capacity: 20 kg
Traverse straightness: 0.5 m/200 mm
L Accuracy (at 20°C): ±(2+2L/100), L : dimension between two
SPECIFICATIONS
measured points (mm)
Table size: 200 x 200 mm
Dimension (WxDxH): 320 x 646 x 105 mm
Mass: 35 kg
Model SV-3000CNC
Code No. 178-521-1E 178-541-1E 178-522-1E 178-542-1E 178-523-1E 178-543-1E 178-524-1E 178-544-1E
(100V - 120V)
Code No. 178-521-2E 178-541-2E 178-522-2E 178-542-2E 178-523-2E 178-543-2E 178-524-2E 178-544-2E
(200V - 240V)
X1-axis measuring 200 mm
range
Z2-axis vertical 300 mm 500 mm 300 mm 500 mm 300 mm 500 mm 300 mm 500 mm
travel
Y-axis table unit — Installed
a-axis unit — Installed — Installed
L-17 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru