Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Formtracer Extreme Technical Data
SV-C3000CNC/SV-C4000CNC
X1 axis (drive unit)
SERIES 525 – Surface Roughness/Contour Measuring System Resolution: 0.05 m
Scale: Reflective-type linear encoder
• A high-accuracy CNC measuring system that enables measurement of surface roughness and form/ Accuracy (at 20°C): ±(1+4L/200) m (SV-C3000CNC),
contour with just one instrument. ±(0.8+4L/200) m (SV-C4000CNC)
• Each axis has a maximum drive speed of 200 mm/s, which permits high-speed positioning that Drive speed: 200 mm/s (max., CNC),
potentially offers a large increase in the throughput of multiple-profile / multiple-workpiece 0 - 60 mm/s (joystick)
measurement tasks. Measuring speed: 0.02 - 2 mm/s
• For models with the axis, it is possible to perform continuous measurement over horizontal and Measuring direction: Forward/backward
inclined surfaces by power-tilting the drive unit. Traverse straightness: 2 m / 200 mm
• For models with the Y-axis table, it is possible to expand the measuring range for multiple workpieces, Note: with the X1 axis in the horizontal
etc., through positioning in the Y-axis direction.
• The contour drive unit of SV-C4000CNC series is equipped with a Laser Hologage detector giving orientation
excellent narrow- and wide-range accuracy and resolution in the Z1 axis. Z1 axis (contour detector)
• Enables inclined plane measurements through simultaneous control of the X1 and Z2 axes. Measuring range: ±25 mm
• If the contour detector is replaced with that for surface roughness measurement, or vice versa, it is a Resolution: 0.2 m (SV-C3000CNC),
simple, one-touch replacement without rerouting of the connecting cables. 0.05 m (SV-C4000CNC)
• The Z1 axis incorporates an anti-collision safety device to automatically stop the detector if it collides Scale type: Linear encoder (SV-C3000CNC),
with a workpiece or jig. Laser Hologage (SV-C4000CNC)
• Supplied with an easy-to-operate Remote Box, from which the user can make any movement by Accuracy (at 20°C): ±(2+|4H|/100) m (SV-C3000CNC),
selecting the required axis using the two joysticks. The current axis selection is easily identified by the +/-(0.8+|0.5H|/25) m (SV-C4000CNC)
icon on the key top. Note: H = Measurement height from the
• Communication with the Data Processing / Analysis section is via USB.
horizontal position (mm)
Formtracer Extreme SV-C3000CNC Stylus up/down
operation: Arc movement
Face of stylus: Downward
Measuring force: 30 mN
Traceable angle: Ascent 70°, descent 70° (using the
standard stylus provided and
depending on the surface roughness)
Stylus tip: Carbide, R25 m
Z1 axis (surface roughness detector)
Range / resolution: 800 m / 0.01 m, 80 m / 0.001 m,
8 m / 0.0001 m (up to 2400 m
with optional stylus)
Measuring force: 4 mN or 0.75 mN (low force type)
Stylus tip: Diamond, 90° / R5 m (60° / R2 m:
low force type)
Detecting method: Differential inductance
Z2 axis (column)
Vertical travel: 300 mm or 500 mm
Resolution: 0.05 m
Scale type: Reflective-type linear encoder
Drive speed: 200 mm/s (max., CNC),
0 - 60 mm/s (joystick)
a axis
Inclination angle: -45° to +10°
Resolution: 0.000225°
Rotation speed: 1 rpm
L
Surface roughness detector Contour detector
L-21 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru