Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Formtracer CS-3200
SERIES 525 – Surface Roughness/Contour Measuring System
• The drive unit (X1 axis) and column (Z2 axis) • Dramatically increased drive speed (X1 axis: Technical Data
are equipped with high-accuracy linear scales 80 mm/s, Z2 axis: 20 mm/s) further reduces total
(ABS type) enabling fully automatic measurement measurement time. Small holes can be efficiently X1 axis
combining vertical and horizontal movement. This measured using the fine-feed knobs on the X and Measuring range: 100 mm
improves reproducibility of continuous automatic Z2 axes. Resolution: 0.05 m
measurement of small holes in the vertical • The detector unit can be extended to avoid Drive speed: 0 - 80 mm/s and manual
direction and repeated measurement of parts interference between the drive unit and Measuring speed: 0.02, 0.05, 0.1, 0.2 mm/s
which are difficult to position. workpiece. All detector and drive unit cables are (surface roughness measurement)
housed inside the main unit to eliminate any risk 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2 mm/s
of abrasion and guarantee trouble free, high- (contour measurement)
speed operation. Measuring direction: Forward / backward
• Measuring range in the Z1-axis (height) direction Traverse straightness: 0.2 m/100 mm (0.4 m/100 mm: at
is dramatically increased from 5 mm to 50 mm the extended detector position) with
Outside diameter 1 when contour detector units 3000, or 4000, are the X1 axis in horizontal orientation
specified. (Both are factory installed options.)
Outside diameter 2 • The drive unit (X1 axis) tilting function is a great Accuracy (at 20°C): ±(0.8+L/100) m, L = drive length (mm)
help with measurements on inclined planes and Inclination range: ±45
when working with heavy workpieces that are Z1 axis
Inside diameter not easily moved. Measuring range: 5 mm
Resolution: 80 nm (5 mm range)
8 nm (0.5 mm range)
0.8 nm (0.05 mm range)
Measurement element Positioning element Accuracy (at 20°C): ±(1.5+|2H|/100) m, H = measured height
Continuous measurement example from the horizontal position (mm)
(Outside diameter 1Outside diameter 2Inside diameter) Measuring force: 0.75 mN
Traceable angle: Ascent: 65°, Descent: 65° (using the
standard chisel-cut stylus and
depending on the surface roughness)
Stylus tip (standard): Diamond, 60° / R2 m
Stylus tip (cone): Sapphire, 30° / R25 m
Face of stylus: Downward
Z2 axis (column)
Column travel: 300 mm
Resolution: 1 m
Drive speed: 0 - 20 mm/s and manual
Base size (WxD): 600 x 450 mm
Base material: Granite
Dimension (WxDxH): 756 x 482 x 966 mm (main unit)
Mass: 140 kg (main unit)
Power supply: 100 - 240V AC ±10%, 50/60Hz
Formtracer CS-3200S4 Power consumption: 400 W (main unit only)
Main Unit A start-up system (relocation detection
Startup System sensor) is an integral security feature of
this machine and will disable its operation
if subject to relocation or strong vibration.
Please be advised to contact your nearest
Mitutoyo Service Centre as soon as possible
or in advance of such circumstance.
L
SPECIFICATIONS CS-3200S4
525-401E
Model 525-411E
Code No. (mm) 100 m
Code No. (inch) 300 mm
X1-axis measuring range Optional
Z2-axis vertical travel Installed
Y-axis travel range
a-axis unit
L-23 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru