Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Formtracer Extreme
CS-5000CNC/CS-H5000CNC
SERIES 525 – CNC Form Measuring Instruments Technical Data
• High-accuracy stylus type CNC Surface Measuring Instrument that allows simultaneous measurement of X1 axis
surface roughness and form/contour. Measuring range: 200 mm
• The X1 and Z2 axes have maximum drive speeds of 40 mm/s and 200 mm/s, respectively. This Resolution: 0.00625 m
Scale type: Laser Holoscale
Drive speed: Max. 40 mm/s (in CNC mode)
permits high-speed positioning that potentially offers a large increase in the throughput of multiple- 0 - 40 mm/s (in joystick control mode)
profile/multiple-workpiece measurement tasks. Measuring speed: 0.02 - 0.2 mm/s (surface roughness)
• Mitutoyo Laser Holoscales are incorporated in the X1 and Z1 axes to provide sufficiently high resolution 0.02 - 2 mm/s (form/contour)
Measuring direction: Forward/backward direction
for simultaneous measurement of form/contour and surface roughness, which is vital for batch working. Traverse straightness: CS-5000CNC:
• The active control method is employed for the Z1-axis detector to implement a wide-range (0.1+0.0015L) m - standard stylus
measurement capability wherein the variation in dynamic measuring force is restricted. (0.2+0.0015L) m - 2X-long stylus
CS-H5000CNC:
• The Z1 axis incorporates an anti-collision safety device to automatically stop the detector unit if it (0.05+0.0003L) m - standard stylus
collides with a workpiece or jig. (0.1+0.0015L) m - 2X-long stylus
• The CS-5000CNC model has an a axis, enabling continuous measurement over horizontal and inclined Accuracy (at 20°C): CS-5000CNC: ±(0.3+0.002L) m
surfaces by power-tilting the detector unit. CS-H5000CNC: ±(0.16+0.001L) m
• Models with the Y-axis table installed allow greater coverage of larger workpieces and enable multiple
workpieces to be measured at one setup. L = measured length (mm)
Z1 axis
• Supplied with the easy-to-operate Remote Box by which the user can control any movement by Measuring range: 12 mm (with standard stylus)
24 mm (with 2X-long stylus)
Resolution: CS-5000CNC:
0.004 m (with standard stylus)
selecting the required axis using the two joysticks. 0.008 m (with 2X-long stylus)
• Uses USB for communicating with the Data Processing/Analysis Unit (optional). CS-H5000CNC:
0.001 m (with standard stylus)
0.002 m (with 2X-long stylus)
Stylus movement: Arc
Scale type: Laser Holoscale
Accuracy (at 20°C): CS-5000CNC: ±(0.3+|0.02H|) m
CS-H5000CNC: ±(0.07+|0.02H|) m
Formtracer Extreme CS-H5000CNC
H = measured height (mm)
Measuring force: 4 mN (with standard stylus)
0.75 mN (with 2X-long stylus)
Traceable angle: 60° for ascent, 60° for descent
(Depending on the workpiece surface
condition)
Face of stylus: Downward
Z2 axis (column unit)
Traverse range: 300 mm or 500 mm*
*Not for CS-H5000CNC
Resolution: 0.05 m
Scale type: Reflective-type linear encoder
Drive speed: Max. 200 mm/s (in CNC mode)
0 - 50 mm/s (in joystick control mode)
Base size (W x D): 750 x 600 mm
Base material: Granite
Y axis
Measuring range: 200 mm
Resolution : 0.05 m
Drive speed: Max.200 mm/s (in CNC mode)
0~50 mm/s (in joystick control mode)
Max.workpiece load: 20 kg
Traverse linearity: 0.5 m/200 mm
Accuracy (at 20C): ±(2+2L/100) m
L L = measured length (mm)
Dimension (WxDxH): 800 x 620 x 1000 mm
(800 x 620 x 1200 mm: tall-column
type)
Mass: 240 kg (250 kg: tall-column type)
Remote box
Wide range detector employing active control technology.
L-25 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru