Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Contracer CV-3200/CV-4500 Technical Data
SERIES 218 – Contour Measuring Instruments X1 axis
Resolution: 0.05 m
• Dramatically increased drive speed (X1 axis: 80 mm/s, Z2 axis: 30 mm/s) further reduces total Scale type: Linear encoder
measurement time. Drive speed: 0 - 80 mm/s and manual
• In order to maintain the traverse straightness specification for an extended period of time, Mitutoyo has Measuring speed: 0.02 - 5 mm/s
adopted highly rigid ceramic guides that combine the characteristics of smallest secular change and Measuring direction: Forward/backward
remarkable resistance to abrasion. Traverse straightness: 0.8 m/100 mm, 2 m/200 mm with
• The drive unit (X1 axis) and column (Z2 axis) are equipped with high-accuracy linear encoders (ABS type the X1 axis in horizontal orientation
on Z2 axis). This improves reproducibility of continuous automatic measurement of small holes in the Accuracy (at 20°C): ±(0.8+0.01L) m
vertical direction and repeated measurement of parts which are difficult to position. (CV-3200/4500 S4, H4, W4)
• A newly designed straight arm has reduced interference on the workpiece and expanded the ±(0.8+0.02L) m
measurement range in the Z1 axis (height) direction. (CV-3200/4500S8, H8, W8)
• One-touch mounting and removal of the arm.
• Designed to handle workpieces calling for high accuracy L = drive length (mm)
Inclination range: ±45°
CV-4500 only: Z2 axis (column)
• With the addition of a new function for continuously measuring top and bottom faces, the variable Resolution: 1 m
measuring force function has become more useful, enabling a wide variety of efficient, high-precision Scale type: ABSOLUTE linear encoder
measurements. Drive speed: 0 - 30 mm/s and manual
• When combined with the double cone end stylus (a new product with diametrically opposed contact Z1 axis (detector unit)
points), the instrument can continuously measure in the upward and downward directions without the Measuring range: ±30 mm
need to change the arm orientation or reset the workpiece fixturing. Resolution: 0.04 m (CV-3200)
• The measuring force can be switched among five levels (upward and downward) from the data- 0.02 m (CV-4500)
processing program (Formtracepak). Scale type: Rotary arc encoder
Accuracy (at 20°C): ±(1.6+I2HI/100) m (CV-3200)
CV-4500 double cone end stylus ±(0.8+I2HI/100) m (CV-4500)
H: measurement height from the horizontal
Contracer CV-3200S4
position (mm)
Stylus orientation: Upward/downward
Measuring force: 30 mN (CV-3200)
10, 20, 30, 40, 50 mN (CV-4500
specified from the data-processing
program Formtracepak)
Traceable angle: Ascent: 77°, descent: 83° using the
standard stylus provided and
depending on the surface roughness
Stylus tip Carbide, R25 m (CV-3200)
Base material: Granite
Mass
Main unit: See table
Controller unit: 14 kg
Remote control box: 0.9 kg
Power supply: 100 - 120V AC ±10%,
200 - 240V AC ±10%, 50/60 Hz
Power consumption: 400 W (main unit only)
Combined Calibration Gauge
• A dedicated calibration gauge enables the user to calibrate
the instrument for Z-axis gain, symmetry, stylus-tip radius,
etc., in a single procedure.
L
Simplified CNC Function
With support for a wide range of optional peripherals designed for use with the CNC models enables
automatic measurement.
Using Y-axis table Using rotary table q1 Using rotary table q2
L-33 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru