Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Contracer Extreme Technical Data
CV-3000CNC/CV-4000CNC
X1 axis
SERIES 218 – CNC Contour Measuring Instruments Measuring range: 200 mm
Resolution: 0.05 m
• High-accuracy CNC contour/form measuring instrument. Scale type: Reflective-type linear encoder
• The X1, Y and Z2 axes have a maximum drive speed of 200 mm/s, which permits high-speed Drive speed: 200 mm/s (max., CNC)
positioning that potentially offers a large increase in the throughput of multiple-profile/multiple- 0 - 60 mm/s (joystick)
workpiece measurement tasks. Measuring speed: 0.02 - 2 mm/s
• For models with the axis, it is possible to perform continuous measurement over horizontal and Measuring direction: Forward/backward
inclined surfaces by power-tilting the detector unit. Traverse straightness: 2 m/200 mm, with the X1 axis in
• The drive unit of the CV-4000CNC series is equipped with a Laser Hologage detector giving excellent horizontal orientation
narrow/wide range accuracy and resolution in the Z1 axis. Accuracy (at 20°C): ±(1+4L/200) m (CV-3000CNC),
• For models with the Y-axis table, it is possible to expand the measuring range for multiple workpieces, ±(0.8+4L/200) m (CV-4000CNC)
etc., through positioning in the Y-axis direction. L = drive length (mm)
• Enables inclined plane measurements through 2-axis simultaneous control in the X- and Y-axis directions. a axis
• The Z1 axis incorporates an anti-collision safety device to automatically stop the detector unit if it Inclination angle: -45° (CCW) to +10° (CW)
collides with a workpiece or jig. Resolution: 0.000225°
• Supplied with an easy-to-operate Remote Box, on which the user can make any movement by selecting Inclination: 1 rpm
the required axis using the two joysticks. The current axis selection is easily identified by the icon on the Z2 axis (column)
key top. Vertical travel: 300 mm or 500 mm
• Communication with the Data Processing/Analysis section is via USB. Resolution: 0.05 m
Scale type: Reflective-type linear encoder
Contracer Extreme Drive speed: 200 mm/s (max., CNC)
CV-3000CNC 0 - 60 mm/s (joystick)
Base size (WxH): 750 x 600 mm
L Base material: Granite
Z1 axis (detector unit)
Measuring range: ±25 mm
Resolution: 0.2 m (CV-3000CNC),
0.05 m (CV-4000CNC)
Scale type: Linear encoder (CV-3000CNC)
Laser Hologage (CV-4000CNC)
Accuracy (at 20°C): ±(2+I4HI/100) m (CV-3000CNC)
±(0.8+I0.5HI/25) m (CV-4000CNC)
H: measurement height from the horizontal
position (mm)
Stylus movement: Arc
Stylus orientation: Upward/downward
Measuring force: 30 mN
Traceable angle: Ascent: 70°, descent: 70° (using the
standard stylus provided and
depending on the surface roughness)
Stylus tip Carbide, R25 m
Y axis
Measuring range: 200 mm
Resolution: 0.05 m
Drive speed: Max.200 mm/s (in CNC mode)
0~60 mm/s (in joystick control mode)
Max. table loading: 20 kg
Traverse straightness: 2 m/200 mm
Accuracy (at 20C): ±(2+2L/100) m, L = length between
arbitrary two point (mm)
Mass: 240 kg (250 kg tall-column type), the
Y-axis table and a vibration isolation
stand are excluded
Power supply: 100 - 240VAC ±10%, 50/60Hz
Power consumption: 500 W (main unit only)
Hologage system
Mitutoyo's innovative Laser Hologage technology provides
near interferometer-grade accuracy using the interference
phenomenon of diffracted light, coupled with a resolution of
0.05 m over the entire detecting range of 50 mm.
Detector
Beam splitter
Mirror
Mirror
Scale
Mirror Mirror
Beam splitter
Laser diode
L-35 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru