Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Optional Accessories
For Surftest, Formtracer and Contracer
Rotary vice 3-axis adjustment table
• Two-slide jaw type. This table helps make the alignment adjustments required when 178-047
• Max. workpiece size: 60 mm measuring cylindrical surfaces. The corrections for the pitch
• Resolution: 1° angle and the swivel angle are determined from a preliminary
218-003: Rotary vice measurement and the Digimatic micrometers are adjusted
986.00 accordingly. A flat-surfaced workpiece can also be levelled with
this table.
Centre support
178-047: 3-axis adjustment table
• Max. workpiece dia.: 120 mm 3170.00
• 60 mm riser is optional
172-142: Centre support Aligned Not aligned
509.00
Traverse direction End point
Centre support riser Traverse direction Start point
• Used with a centre support. Axial line
• Max. workpiece dia.: 240 mm
172-143: Centre support riser Start point End point
205.00
Axial line
Recorded profiles
Swivel centre support Levelling table Digital levelling table Cross-travel table
• Max. workpiece dia.: 80 mm* • Table top: 130 x 100 mm • Table top: 130 x 100 mm • Table top: 280 x 180 mm
*65 mm when swivelled 10° • Levelling range: ±1.5° • Levelling range: ±1.5° • XY travel: 100 x 50 mm
• Max. workpiece length: 140 mm • XY travel: ±12.5 mm • XY travel: ±12.5 mm
172-197: Swivel centre support 178-043-1: Levelling table (mm) 178-042-1: Digital levelling table
348.00 2060.00 (mm)
178-053-1: Levelling table (inch) 2670.00
Holder with clamp 1760.00 218-001: Cross-travel table (mm)
1610.00
• Used with a cross-travel table or
rugged table.
• Max. workpiece height: 35 mm
176-107: Holder with clamp
148.00
V-block with clamp
• Used with a cross-travel table 178-234
or rugged table. 178-378
• Max. workpiece dia.:
50 mm (172-234),
25 mm (172-378) Levelling table Cross-travel table V-block
172-234: V-block with clamp • Table top: 130 x 100 mm • Table top: 280 x 152 mm • Workpiece diameter: 1 mm to 160 mm
259.00 • Levelling range: ±1.5° • XY travel: 50 x 25 mm • Can be mounted on a levelling table
• Height: 40 mm
172-378: V-block with clamp 178-016: Levelling table 218-041: Cross-travel table (mm) 998291: V-block
194.00 548.00 1980.00 500.00
218-051: Cross-travel table (inch)
1850.00
L
Precision vice Calibration stand Calibration stand
• Max. workpiece size: 36 mm Required for calibrating upward Required for calibrating in bulk by
• Can be mounted on a levelling table measurement of CV-3200 series. mounting straight arm/small-hole stylus
12AAM100: Calibration stand arm without using cross-travel table and
178-019: Precision vice POA Y-axis table.
608.00 12AAG175: Calibration stand
250.00
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. L-40
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru