Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Optional Accessories DAT (Digital Adjustment Table) function DAT (Digital Adjustment Table) function
350850: Cylindrical square The turntable displays centering and levelling 3. By adjusting the digital micrometer heads for the
337.00 adjustments digitally, making this challenging task rotary table, the adjustment values displayed on
simple enough for even an untrained operator to the monitor can be achieved.
356038: Auxiliary stage for a low-height workpiece perform.
264.00 1. Preliminary measurement of two cross sections
12AAF203: 2X extension detector holder “A” and “B”.
1720.00
12AAF204: Auxiliary detector holder for a large-diameter Turntable Turntable
workpiece axis Initial misalignment of axes axis
1350.00
12AAL090: Sliding detector holder Turntable
1300.00 Workpiece
211-045: Magnification checking gauge Turntable
1980.00
Workpiece
211-014: Chuck (OD: 2-78 mm, ID: 25-68 mm) A
487.00 B
211-032: Quick chuck (OD: 1-79 mm, ID: 16-69 mm)
1220.00 Initial misalignment of axes
211-031: Micro-chuck (OD: 0.1-1.5 mm)
941.00
178-025: Vibration isolator (desktop type) 2. Following preliminary measurement, the 4. Centering and levelling is complete.
4790.00 centering and levelling adjustment values are Centering range: ±3 mm
displayed on the monitor. Levelling (inclination) range: ±1°
12AAK110: Vibration isolator (desk type)
POA
12AAK120: Monitor arm (for 12AAK110) SPECIFICATIONS
POA
12AAL019: Side table (for 12AAK110) Model
POA Code No. (mm)
Code No. (inch/mm)
RA-1600
211-723E
211-733E
211-032 211-014 DIMENSIONS
Unit: mm
211-031 356038 105 350
211-045 350850 655 840 490 390
Max.890 230
Sliding detector-unit holder provided as a standard L
feature (Option) 150
The detector-unit holder is equipped with a sliding
mechanism, enabling one-touch measurement of a workpiece 70 130
with a deep hole having a thick wall, which has been difficult
with the conventional standard arm.
Sliding distance: 112 mm
The detector-unit holder can
be stopped at a position
sufficiently higher than
the workpiece along the
Z axis, and then lowered
and positioned to make
measurements. Furthermore,
internal/external diameters
can be easily measured
with the continuous
internal/external diameter
measurement function*.
*See this page for details about the continuous ID and OD measuring
function.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. L-52
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru