Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Optional Accessories
For Roundness Measuring Instruments
Collet chuck Collets
• Used for holding parts with a collet (optional). • Individual collets for the collet chuck.*3
Code No. 211-061 Code No. Holding capacity Price
12AAH402 OD: 0.5~1.0 mm 140.00
Holding capacity OD: 0.5~10 mm*1 12AAH403 OD: 1.0~1.5 mm 140.00
12AAH404 OD: 1.5~2.0 mm 110.00
Centering error 50 m or less *2 12AAH405 OD: 2.0~2.5 mm 110.00
12AAH406 OD: 2.5~3.0 mm 100.00
Mass 1.4 kg 12AAH407 OD: 3.0~3.5 mm 100.00
Price 670.00 12AAH408 OD: 3.5~4.0 mm 100.00
12AAH409 OD: 4.0~5.0 mm 100.00
*1 Collets compatible with the workpiece are optional. 12AAH410 OD: 5.0~6.0 mm 100.00
*2 When measured with a 5 mm pin gauge at the measurement height 12AAH411 OD: 6.0~7.0 mm 100.00
of 30 mm. 12AAH412 OD: 7.0~8.0 mm 100.00
12AAH413 OD: 8.0~9.0 mm 100.00
Centering chuck (ring operated) 12AAH414 OD: 9.0~10.0 mm 100.00
• Suitable for holding small parts with easy-to- *3 Collet chuck holder is necessary to fix the individual collets on the
operate knurled-ring clamping. rotary table.
Centering chuck (handle operated)
• Suitable for holding longer parts and those
requiring a relatively powerful clamp including
crank shafts and pin shafts.
Code No. 211-032
OD: 1~36 mm
Holding Internal jaws ID: 16~69 mm
capacity External jaws OD: 35~78 mm
118 x 41 mm
External dimensions (DxH) Code No. 211-014
1.2 kg OD: 2~35 mm
Mass 1220.00 Holding Internal jaws ID: 25~68 mm
capacity External jaws OD: 35~78 mm
Price 157 x 70.6 mm
Micro-chuck External dimensions (DxH) 3.8 kg
487.00
• Used for clamping a workpiece (less than 1 mm) Mass
that the centering chuck cannot handle.
Price
Magnification calibration gauge
• Used for normalizing detector magnification by
calibrating detector travel against displacement
of a micrometer spindle.
L Code No. 211-031
Holding capacity OD: ~1.5 mm
External dimensions (DxH) 107 x 48.5 mm
Mass 0.6 kg
Price 941.00 Code No. 211-045
Magnification checking kit*4 Max. calibration range 400 m
• A combination of gauge blocks and an optical flat. Graduation 0.2 m
External dimensions (WxDxH) 235 (max) x 185 x 70 mm
Mass 4 kg
Price 1980.00
Recording paper set
• For the RA-10, RA-120 and RA-220 thermal printers.
Code No. 997090 Code No. 12AAH181
Price 208.00 Number of rolls 10 (25 m per roll)
Price
*4 Supplied with RA-H5200/RA-H5200 CNC/RA-2200/RA-2200 CNC as 60.40
standard.
L-63 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru