Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Micrometers
SERIES 326 – Digimatic Interchangeable Anvil Screw Thread Micrometer
• Anvils and spindle tips are interchangeable in matching pairs to enable measurement of Metric/Unified Technical Data
or Whitworth threads.
• Direct reading of screw pitch diameter (no need for calculation). Spindle feed error: 3 m (.00015")
Battery: SR44 (2 pcs) 938882
• Equipped with Ratchet Stop for constant measuring force. Functions
• Interchangeable anvils/spindle tips are optional.
Origin point setting (ABS measurement system):
Resets the ABS origin at the current spindle position to the
minimum value of the measuring range and switches to ABS
B mode.
Zero setting (INC measurement system):
A brief press on the ZERO/ABS button sets display to zero at
the current spindle position and switches to the incremental
(INC) measuring mode. A longer press resets to the ABS
measuring mode.
• Dust-tight and water Hold:
jet protected IP65 Pressing the HOLD button freezes the current value in the
display. This function is useful for preserving a measurement
C 000002160 in situations of poor visibility where the instrument must be
6.35 moved away from the workpiece before the reading can be
6 recorded.
18 Auto power ON/OFF:
9.7
The reading on the LCD disappears after this instrument is
326-351-10 idle for about 20 minutes, but the reading and measurement
mode are retained. Turning the spindle causes the reading to
reappear.
Data output:
Models equipped with this function have an output port for
transferring measurement data to a Statistical Process Control
(SPC) system.
Error alarm:
In the unlikely event of a display overflow or calculation
Interchangeable anvils / error, an error message is displayed and measurement stops.
spindle tips (optional) Measurement cannot continue until the error is corrected.
Also, if the battery voltage drops below a certain point, the
SPECIFICATIONS battery indicator will turn on before measurement becomes
Inch/Metric Range Resolution Accuracy* impossible, warning the user that the battery needs to be
Code No. replaced.
Price
326-351-10 0-25 mm (0-1") ±4 µm (±.0002") 485.00 Optional Accessories
326-352-10 25-50 mm (1-2") ±5 µm (±.00025") 496.00
326-353-10 50-75 mm (2-3") 0.001 mm (.00005") 515.00 05CZA662: SPC data cable with pushbutton (1 m)
326-354-10 75-100 mm (3-4") 537.00 58.50
05CZA663: SPC data cable with pushbutton (2 m)
* Excluding quantizing error. 70.40
Note: A matching setting standard is supplied with each model (except for 0-25 mm measuring range). The setting standard is for metric threads (unified)
60°. 06ADV380B: USB Input Tool Direct USB-ITN-B (2 m)
106.00
DIMENSIONS 02AZD790B: SPC data cable for U-WAVE-T (160 mm)
52.20
Unit: mm 02AZE140B: SPC data cable for U-WAVE-T and footswitch
18 L 14.5 2 47.2 2.3 3 43 17 (160/500 mm)
119.00
27.5 For interchangeable anvil/spindle tips sets refer to page B-32
Range L c
0-25 mm 39.5 25
25-50 mm 64.5 32
50-75 mm 90 45
75-100 mm 115.6 65
B-31 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru