Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Formtracer Extreme SV-C3000CNC / SV-C4000CNC
Specifications _____________________ Series 525 - Surface and Contour Measuring Instrument
Common 750 x 600 mm
Base size (WxD) Granite • High-accuracy CNC Surface and Contour Measuring Instrument that allows measurement of sur-
Base material 240 kg (250 kg high column face roughness and contour with one unit.
Mass type)
Contour Measurement • Each axis has the maximum drive speed of 200 mm/s, which permits high-speed positioning that
________________ _____________________ has the potential to produce a large increase in the throughput of multiple-profile/multiple-
X-axis 200 mm workpiece measurement tasks.
Measuring range 0,05 µm
Resolution Reflective-type linear encoder • It is possible to perform continuous measurement over horizontal and inclined surfaces by pow-
Scale 200 mm/s (max. CNC) er-tilting the detector unit.
Drive speed 0 - 60 mm/s (joystick)
0,02 - 2 mm/s • For models with the Y-axis table, it is possible to expand the measuring range for multiple-work-
Measuring speed Forward/backward pieces, etc., through positioning in the Y-axis direction.
2 µm/200 mm
Traverse straightness ±(1+4/200L) µm • The contour drive unit of SV-C4000CNC series is equipped with a Laser Hologage detector giving
Linear displacement ±(0.8+4C/200) µm excellent narrow/wide range accuracy and resolution in the Z1-axis.
accuracy (at 20°C) -45° (CCW) to +10° (CW)
Inclining range 0.000225° • Enables inclined plane measurements through 2-axis simultaneous control in the X and Y direc-
Resolution 1 rpm tions.
Rotating speed _____________________
Z2-axis (column) 300 mm or 500 mm (H) • When the detector for contour measurement is replaced with that for surface roughness meas-
Vertical travel 0,05 µm urement, or vice versa, it is a simple, one-touch replacement without re-routing of the connect-
Resolution Reflective-type linear encoder ing cables.
Scale 200 mm/s (max. CNC)
Drive speed 0 - 60 mm/s (joystick) • Since the Z1-axis detector incorporates an anti-collision safety device, the detector unit will auto-
_____________________ matically stop even if its main body collides with a workpiece or jig.
Z1-axis (detector
unit) ±25 mm • Supplied with an easy-to-operate Remote Box, on which the user can make any movement by
Measuring range 0,2 µm (SV-C3000CNC) selecting the required axis using the two joysticks. The current axis selection is easily identified
Resolution 0,05 µm (SV-C4000CNC) by the icon on the key top.
Linear encoder (SV-C3000CNC)
Scale Laser Hologage (SV-C4000CNC) Surface Roughness drive unit SV-C3000CNC
±(2+I4HI/100) µm(SV-C3000CNC) Contour drive unit
Linear displacement ±(0.8+I0.5HI/25) µm (SV-
accuracy (at 20°C) C4000CNC)
Arc movement
Stylus up/down
operation Downward
Measuring face
direction 30 mN
Measuring force Ascending 70°, descending 70°
Traceable angle (using the standard stylus
provided and depending on the
Stylus tip surface roughness)
________________ Radius 25 µm, carbide tip
X1-axis Surface Roughness
Measuring range _____________________
Resolution 200 mm
Scale 0,05 µm
Drive speed Reflective-type linear encoder
200 mm/s (max. CNC)
Measuring speed 0 - 60 mm/s (joystick)
Traverse direction 0,02 - 2 mm/s
Traverse straightness Backward
-axis 0,5 µm / 200 mm
Inclination angle _____________________
Resolution -45° to +10°
Inclination speed 0.000225°
Z2-axis (column) 6°/s
Vertical travel _____________________
Resolution 300 mm or 500 mm
Scale 0,05 µm
Drive speed Reflective-type linear encoder
200 mm/s (max. CNC)
Detector 0 - 60 mm/s (joystick)
Range/resolution Optional
800/0,01 µm, 80/0,001 µm,
Measuring force 8/0,0001 µm (up to 2400 µm
Stylus tip with an optional stylus)
4 mN or 0.75 mN
Type Diamond, 60°/2 µmR (178-396-2)
90°/5 µmR (178-397-2)
Differential inductance
The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended 579
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times. mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru
