Mitutoyo - Полный каталог инструмента - 2012-2013 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Formtracer Extreme SV-C3000CNC / SV-C4000CNC
Series 525 - Surface and Contour Measuring Instrument Specifications
SV-C3000CNC Optional Vibration isolation stand
Model
No. SV-C3000CNC-S SV-C3000CNC-S. SV-C3000CNC-H SV-C3000CNC-H. Accessories
525-522-2* 525-524-2* 525-542-2* 525-544-2
Z2-axis vertical travel 300 mm 300 mm 500 mm 500 mm Mechanism Diaphragm air spring
Y-axis table unit - Installed - Installed
-axis unit Installed Installed Installed Installed Natural frequency 2.5 - 3.5 Hz
Levelling Automatic control with mechanical
valves
Air supply pressure 390 KPa
Max. loading 350 kg
capacity
SV-C4000CNC Dimensions 1080 x 995 x 718 mm
Model
No. SV-C4000CNC-S SV-C4000CNC-S. SV-C4000CNC-H SV-C4000CNC-H. (WxDxH)
525-622-2* 525-624-2* 525-642-2* 525-644-2*
Z2-axis vertical travel 300 mm 300 mm 500 mm 500 mm Mass 315 kg
Y-axis table unit - Installed - Installed
-axis unit Installed Installed Installed Installed Y-axis table unit _______________________
Measuring range 200 mm
Resolution 0,05 µm
Scale unit Reflective-type linear encoder
Drive speed 200 mm/s (max. CNC)
0 - 60 mm/s (joystick)
Max. loading 20 kg
capacity
Traverse 0,5 µm / 200 mm
straightness
Linear ±(2+2L/100) µm, contour mode
displacement L : Dimension between two
accuracy (at 20°C) measured points (mm)
Table size 200 x 200 mm
Dimensions 320 x 646 x 105 mm
(WxDxH)
Z2-axis Y-axis -axis Mass 35 kg
Additional Specifications
Software FORMTRACEPAK
Allows control of the optional motor-driven
Y-axis table and rotary table for efficient
measurement automation.
Contour evaluation can be performed using
analysis of level differences, angle, pitch,
area and other characteristics based on
surface roughness data. An original
inspection certificate can be created by
setting the print format to selected
requirements.
Through 2-axis simultaneous control in the X and Y directions
580 The prices listed are suggested retail prices (valid until 31st May 2013). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products to be sold to commercial customers. Therefore VAT is not included. Product illustrations are
without obligation. Product descriptions respectively capability characteristics are only binding when explicitly agreed upon. * Please contact
Mitutoyo for more information on delivery times.
mitutoyo@mitutoyo-tools.ru
www.mitutoyo-tools.ru