Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Calipers
SERIES 500 – ABSOLUTE Digimatic Coolant Proof Caliper
• Can be used in workshop conditions exposed to • Can measure outside and inside dimensions, Technical Data
coolant, water, dust or oil. Other specifications depth, and steps.
and price are the same as the conventional • The automatic power-on/off function shuts down Resolution: 0.01 mm (.0005")
products. 100% inspection by air leak test is the LCD display after 20 minutes inactivity, but
performed to ensure quality and reliability. the ABS scale unit origin is stored. Power is Repeatability: 0.01 mm
• Large LCD characters make the display easy to restored when the slider is moved.
read. • A convenient interface input tool is available Quantizing error: Not including ±1 count
• Easy to use – advanced design styling with only 1 so that measurement data can be converted to
button. keyboard signals and input directly to commercial Dust/water protection
• Incorporates Mitutoyo's ABSOLUTE measurement spreadsheet software.
system. No need to reset the origin. • An inspection certificate is supplied as standard. level: IP67*1
• SPC data output models can be integrated (However, this cannot be used as a calibration
into statistical process control and measurement certificate as it is undated.) Scale type: ABSOLUTE electromagnetic induction
systems.
linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3 years under normal use (1
year: over 300 mm models)
*1 Rustproofing treatment to be applied after use.
D Functions
ABSOLUTE system measurement:
After power is turned ON, measurement can be started
without zero-setting if origin-setting was previously
performed. The ABS (absolute) origin position can be changed
by the ORIGIN button.
Zero-setting (INC measurement mode):
Displayed value can be set to zero at any arbitrary position of
the slider for comparative measurements.
A 201120740 Auto ON/OFF:
DB The reading on the LCD disappears after this instrument is idle
500-753-10 for a short time, but the origin point is retained. Moving the
E0 slider causes the reading on the LCD to reappear.
500-737-10
Data output:
Models equipped with this function have an output port for
transferring measurement data to a Statistical Process Control
(SPC) system.
Inch/mm selection:
Switches the units of measurement (at any time).
Alerts:
In the unlikely event of a display overflow or calculation
error, an error message is displayed and measurement stops.
Measurement cannot continue until the error is corrected.
If the battery voltage drops below a certain point, the
battery indicator will turn on before measurement becomes
impossible, warning the user that the battery needs to
be replaced. If contamination on the surface of the scale
causes a calculation error, an error message is displayed and
measurement stops.
Optional Accessories
DIMENSIONS 05CZA624: SPC data cable with pushbutton (1 m)
58.50
Unit: mm
05CZA625: SPC data cable with pushbutton (2 m)
C 70.40
06ADV380A: USB Input Tool Direct USB-ITN-A (2 m)
106.00
02AZD790A: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140A: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
114.00
Range ABCD E
16
0-150 mm 21 16.5 233 40 20
0-200 mm 24.5 20 290 50
0-300 mm 27.5 21.8 404 64
Outside jaw thickness: 3.5 mm (500-714-10: 3.8 mm)
D-5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru