Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Calipers Technical Data
SERIES 552 – ABSOLUTE Digimatic Long Jaw Carbon Fibre Caliper Scale type: ABSOLUTE electromagnetic induction
• A lightweight Digimatic caliper that uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws.
• Data output function allows integration into statistical process control and measurement systems.
linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 5,000 hours in continuous use
Dust/water
protection level: IP66*3
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
*3 Rustproofing treatment to be applied after use.
• Dust-tight and water Functions
protected IP66
ABSOLUTE system measurement:
FE 000000716 After power is turned ON, measurement can be started
HG without zero-setting if origin-setting was previously
552-160-10 performed. The ABS (absolute) origin position can be changed
1 by the ORIGIN button.
D
Zero-setting (INC measurement mode):
SPECIFICATIONS Displayed value can be set to zero at any arbitrary position of
the slider for comparative measurements.
Inch/Metric
Auto ON/OFF:
Code No. Range*1 Resolution Accuracy*2 Price The reading on the LCD disappears after this instrument is idle
0.01 mm/.0005" 930.00 for a short time, but the origin point is retained. Moving the
552-160-10 0 (20)-450 mm/0 (.5")-18" ±0.06 mm/±.0025" 1070.00 slider causes the reading on the LCD to reappear.
1530.00
552-161-10 0 (20)-600 mm/0 (.5")-24" ±0.07 mm/±.003" 1750.00 Data output:
±0.11 mm/±.0045" 2230.00 Models equipped with this function have an output port for
552-162-10 0 (20)-1000 mm/0 (1")-40" ±0.14 mm/±.0055" transferring measurement data to a Statistical Process Control
Unit: mm (SPC) system.
552-163-10 0 (20)-1500 mm/0 (1")-60"
H Data hold:
552-164-10 0 (20)-2000 mm/0 (1")-80" 8 By using the data hold unit (option), the displayed value can
be held. This cannot be used with the data output function.
*1 ( ): Minimum dimension in inside measurement.
*2 Excluding quantizing error. Presetting (ABS INC measurement mode):
Displayed value can be set to any arbitrary value.
DIMENSIONS A
D Offsetting:
C Automatically adds the thickness of the inside jaws to the
measured value so that the result can be read directly, without
100 calculation.
200
Inch/mm selection:
24 Switches the units of measurement (at any time).
B 8 Alerts:
R10 In the unlikely event of a display overflow or calculation
8 error, an error message is displayed and measurement stops.
Measurement cannot continue until the error is corrected.
Range AB CDE F G If the battery voltage drops below a certain point, the
0-450 mm 89 91.8 65.5 173 25 battery indicator will turn on before measurement becomes
0-600 mm 680 impossible, warning the user that the battery needs to
0-1000 mm 830 110 113.8 73 170.5 32 be replaced. If contamination on the surface of the scale
0-1500 mm causes a calculation error, an error message is displayed and
0-2000 mm measurement stops.
Optional Accessories
05CZA624: SPC data cable with pushbutton (1 m)
58.50
05CZA625: SPC data cable with pushbutton (2 m)
70.40
06ADV380A: USB Input Tool Direct USB-ITN-A (2 m)
106.00
02AZD790A: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140A: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
114.00
6.35
1280
1790 12.7 12
2300
D-21 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru