Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Technical Data SERIES 552 – ABSOLUTE Digimatic Coolant Proof Ceramic Jaw Carbon Fibre
Caliper
Scale type: ABSOLUTE electromagnetic induction • A lightweight Digimatic caliper that uses CFRP • Zirconia ceramic contact surfaces for high
linear encoder (Carbon Fibre Reinforced Plastics) in the beam resistance to wear..
Max. response speed: Unlimited and jaws. • Data output function allows integration into
Battery: SR44 (1 pc.), 938882 • Rustless and nonmagnetic. Suitable for measuring statistical process control and measurement
Battery life: Approx. 5,000 hours in continuous use magnetic components. systems.
Dust/water
protection level: IP66*3
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
*3 Rustproofing treatment to be applied after use.
Functions • Dust-tight and water1 D
protected IP66
ABSOLUTE system measurement: 000000716 E
After power is turned ON, measurement can be started E
without zero-setting if origin-setting was previously 552-165-10
performed. The ABS (absolute) origin position can be changed
by the ORIGIN button. SPECIFICATIONS
Zero-setting (INC measurement mode): Inch/Metric
Displayed value can be set to zero at any arbitrary position of
the slider for comparative measurements. Code No. Range*1 Resolution Accuracy*2 Price
0.01 mm/.0005" ±0.04 mm/±.002" 1020.00
Auto ON/OFF: 552-165-10 0 (20)-450 mm/0 (.5")-18" 1060.00
The reading on the LCD disappears after this instrument is idle
for a short time, but the origin point is retained. Moving the 552-166-10 0 (20)-600 mm/0 (.5")-24" Unit: mm
slider causes the reading on the LCD to reappear.
*1 ( ): Minimum dimension in inside measurement. K
Data output: *2 Excluding quantizing error. R10
Models equipped with this function have an output port for
transferring measurement data to a Statistical Process Control DIMENSIONS
(SPC) system.
A
Data hold: DF
By using the data hold unit (option), the displayed value can
be held. This cannot be used with the data output function.
Presetting (ABS INC measurement mode):
Displayed value can be set to any arbitrary value.
Offsetting:
Automatically adds the thickness of the inside jaws to the
measured value so that the result can be read directly, without
calculation.
Inch/mm selection:
Switches the units of measurement (at any time).
Alerts:
In the unlikely event of a display overflow or calculation
error, an error message is displayed and measurement stops.
Measurement cannot continue until the error is corrected.
If the battery voltage drops below a certain point, the
battery indicator will turn on before measurement becomes
impossible, warning the user that the battery needs to
be replaced. If contamination on the surface of the scale
causes a calculation error, an error message is displayed and
measurement stops.
Optional Accessories
05CZA624: SPC data cable with pushbutton (1 m)
58.50
05CZA625: SPC data cable with pushbutton (2 m) C
70.40 B
06ADV380A: USB Input Tool Direct USB-ITN-A (2 m) H
106.00
10(.25) 10(.25)
02AZD790A: SPC data cable for U-WAVE-T (160 mm) G
52.20
K
02AZE140A: SPC data cable for U-WAVE-T and footswitch J
(160/500 mm)
114.00
914053: Clamp box (1 pair)*4 Range ABCD E F G H J
117.00 0-450 mm 25 91.8 35 65 8
0-600 mm A
914055: Centre-to-Centre jaws (1 pair)*4 640 100 18 41.2 D-22 F
157.00 790
914057: Point jaws*4 D
179.00
*4 Refer to page D-20 for details.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru
