Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Calipers
SERIES 552 – ABSOLUTE Digimatic Coolant Proof Interchangeable Jaw Technical Data
Carbon Fibre Caliper
• A lightweight Digimatic caliper that uses CFRP • The range of applications can be expanded by Scale type: ABSOLUTE electromagnetic induction
(Carbon Fibre Reinforced Plastics) in the beam using interchangeable jaws (optional). linear encoder
and jaws. • Data output function allows integration into Max. response speed: Unlimited
• Provided with preset function for setting a desired statistical process control and measurement Battery: SR44 (1 pc.), 938882
starting point, which allows direct readout of systems. Battery life: Approx. 5,000 hours in continuous use
offset measurement. Dust/water
protection level: IP66*2
Standard accessory: Jaw clamps (2 pcs.), 05GZA033
*2 Rustproofing treatment to be applied after use.
• Dust-tight and water1 Functions
protected IP66
ABSOLUTE system measurement:
D After power is turned ON, measurement can be started
000000716 without zero-setting if origin-setting was previously
performed. The ABS (absolute) origin position can be changed
552-192-10 by the ORIGIN button.
Optional interchangeable jaws Zero-setting (INC measurement mode):
Displayed value can be set to zero at any arbitrary position of
SPECIFICATIONS the slider for comparative measurements.
Inch/Metric Auto ON/OFF:
The reading on the LCD disappears after this instrument is idle
Code No. Range*1 Resolution Accuracy*1 Price for a short time, but the origin point is retained. Moving the
552-191-10 0-450 mm/0-18" 0.01 mm/.0005" 750.00 slider causes the reading on the LCD to reappear.
552-192-10 0-600 mm/0-24" ±0.04 mm/±.002" 790.00
552-193-10 0-1000 mm/0-40" 1250.00 Data output:
552-194-10 0-1500 mm/0-60" ±0.09 mm/±.004" 1500.00 Models equipped with this function have an output port for
552-195-10 0-2000 mm/0-80" ±0.12 mm/±.005" 1950.00 transferring measurement data to a Statistical Process Control
*1 Excluding quantizing error. (SPC) system.
Application examples Scriber type Data hold:
By using the data hold unit (option), the displayed value can
Surface plate type and standard type be held. This cannot be used with the data output function.
Standard type (right) Scriber type (right) Presetting (ABS INC measurement mode):
Scriber (arc) Displayed value can be set to any arbitrary value.
Scriber type
(left) Offsetting:
Automatically adds the thickness of the inside jaws to the
Surface plate type Surface plate type and scriber for height gauges measured value so that the result can be read directly, without
calculation.
Inside point type
Inch/mm selection:
Scriber for height gauges Switches the units of measurement (at any time).
Inside point type Surface plate type Alerts:
In the unlikely event of a display overflow or calculation
Surface plate type and centreline type error, an error message is displayed and measurement stops.
Measurement cannot continue until the error is corrected.
If the battery voltage drops below a certain point, the
battery indicator will turn on before measurement becomes
impossible, warning the user that the battery needs to
be replaced. If contamination on the surface of the scale
causes a calculation error, an error message is displayed and
measurement stops.
Optional Accessories
05CZA624: SPC data cable with pushbutton (1 m)
58.50
05CZA625: SPC data cable with pushbutton (2 m)
70.40
06ADV380A: USB Input Tool Direct USB-ITN-A (2 m)
105.90
02AZD790A: SPC data cable for U-WAVE-T (10 mm)
52.20
02AZE140A: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
114.00
Centreline type
Surface plate type
D-23 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru