Mitutoyo - Полный каталог инструмента - 2014 Английский язык

                                                                       для размещения заказа - mitutoyo@mitutoyo-tools.ru

                                                                       Ceraston – Accessory for Gauge Block Maintenance

Removing Burrs                                                         •	Alumina-ceramic abrasive stone for removing                           •	Excellent in the ease with which burrs can
                                                                       	 burrs from hard materials such as ceramics that                       	 be removed and for durability compared with
Figure 1                                                               	 ordinary stones cannot handle.                                        	 Arkansas stones.
                                                                       •	Can be used both for steel gauge blocks and                           •	Both sides can be used.
               CERASTON (Or Arkansas stone)                            	 CERA blocks.
Figure 2

           Rubber                                                                                                                                                                             E
CERASTON (Or Arkansas stone)

(1)	Wipe any dust and oil films from the gauge block and the 	                                  601644                                               601645
		 Ceraston (or Arkansas stone) using a solvent.
(2)	Place the gauge block on the Ceraston so that the                  SPECIFICATIONS                            Dimensions                                     Price
		 measuring face that has burrs is on the abrasive surface of                                          150 (W) x 50 (D) x 20 (H) mm                         285.00
		 the stone. While applying light pressure, move the gauge             Code No.                        100 (W) x 25 (D) x 12 (H) mm                         121.00
		 block to and fro about ten times (Fig. 1). Use a block               601644
		 rubber for thin gauge blocks to apply even pressure (Fig. 2).        601645
(3)	Check the measuring face for burrs with an optical flat. If
		 the burrs have not been removed, repeat step (2). If burrs
		 are too large, they may not be removed with an abrasive
		 stone. If so, discard the gauge block.

Note: The abrasive surface of a Ceraston must be made flat by lapping
it from time to time. After lapping the Ceraston, the lapping powder
must be completely removed from the surface to prevent the surface
of the gauge block from being scratched.

Mitutoyo does not offer Arkansas stones.

                                                                       Application example.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.  E-16
Therefore the company reserves the right to change any or all aspects of any product specification without notice.

                                                                                mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru