Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Optional Accessories DIMENSIONS Unit: mm
21EAA194: SPC data cable (1 m) ID-N
40.00
35 25 20 - 22.5
21EAA190: SPC data cable (2 m) 7.6 10 - 13
45.00
66.2 21.7 6.2-5R3.25 5
02AZD790G: SPC data cable for U-WAVE-T (160 mm)
52.20
02AZE140G: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
21EAA210: Bifurcated connecting cable with zero-setting
terminal (1 m)*
102.00
40.6 9.52 -00.03 49.4
15.2 6.2 88.1
53.9 7.3
21EAA211: Bifurcated connecting cable with zero-setting 13.3
terminal (2 m)*
115.00 Contact point Equipped with an optional lug
4-48 UNF
21EZA146: Lug ID-B 21.7
10.10
35
21EZA150: Lifting knob (ID-N only) F
10.90 9.52 -00.03
Contact point
02ACA376: Rubber boot for ID-N, NBR 4-48 UNF4 44.3 20 - 22.5
2.80 7.6 10 - 13
Sample applications
125317: Rubber boot for ID-B, NBR 66.2 6.25-R3.25
3.80 6.2
238774: Rubber boot for ID-N, silicone
11.90
21EAA212: Rubber boot for ID-B, silicone
5.80
Contact points for Mitutoyo's dial indicators (refer to pages 46.3 49.4
F-37 to F-40 for details) 40.7 80.5
* Two of the wires inside the cable are separated for zero setting 15.2
without touching the SET switch on the main body. Use these cables 7.3
in combination with commercially available switches. Zero setting is
performed by briefly connecting these two wires together (less than 5.6
a second), and ABS preset & recall by connecting for a second or
more.
Equipped with an optional lug
Lifting knob
Plunger can be manually lifted. Remove the plunger cap for
ID-N and attach the lifting knob to the plunger. Note that
water resistance is not maintained in this configuration.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-6
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru