Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
SERIES 543 – ABSOLUTE Digimatic Calculating Indicator ID-C
Technical Data • This indicator incorporates an internal calculation • The chance of over-speed error has been avoided
function that operates from plunger thanks to the ABSOLUTE sensor.
Display: 6-digit LCD and sign displacement. Using dedicated fixtures, • Tolerance judgement is available by presetting
measurements of outside and inside diameter upper and lower limit values.
Scale type: ABSOLUTE electrostatic linear and radius of curvature can easily be made • Large, easy-to-read LCD 7-digit readout with a
without needing to use conversion tables or character height of 8 mm. Can be rotated up to
encoder manual calculations, and requiring access to only 330 to achieve the optimum reading position.
one side of the component to be measured. • Equipped with a data output port that enables
Stem dia: 8 mm • The ABSOLUTE sensor restores the last origin incorporation into measurement networking and
position automatically when the indicator statistical process control systems.
Standard contact point: 901312 is turned on.
Battery: SR44 (2 pcs.) 938882
Battery life: 1 year under normal use*1
Dust/water protection
level: IP42
*1 Operation time per day: 8 hours
Functions
Origin-set/Preset, Zeroset, GO/±NG judgement, Power ON/
OFF, Data output, inch/mm reading (inch/mm models), Max/
Min value holding, Function lock, Data hold
Alarm: Low voltage, Counting value composition error,
Overflow error, Tolerance limit setting error
Optional Accessories
905338: SPC data cable (1 m)
32.90
905409: SPC data cable (2 m)
36.80
02AZD790F: SPC data cable for U-WAVE-T (160 mm) F
52.20
02AZE140F: SPC data cable for U-WAVE-T and footswitch
(160/500 mm)
107.00
902011: Plunger lifting lever Calculation function: f(x) = Ax + B + C/x
2.80
x = plunger movement
540774: Plunger lifting cable A, B and C are user definable over a wide range
20.50
264-504-5E: Digimatic Mini-Processor DP-1VR 543-286B
342.00
Contact points for Mitutoyo's dial indicators (refer to pages
F-37 to F-40 for details)
Interchangeable backs (refer to page F-41 for details) SPECIFICATIONS
Measuring stands (refer to pages F-70 to F-73 for details)
Inch/Metric
Code No. Range Resolution (switchable) Accuracy* Measuring force Price
1.5 N or less 298.00
543-286B .5"/12.7 mm .00001"-.05"/ .00012"/0.003 mm
0.0002-1 mm Unit: mm
* Quantizing error of ±1 count is excluded.
DIMENSIONS
27.6 10.9
54 8 0
60.5 –0.009
54.4
M2.5x0.45 46.5 50.14.8
21.2 16.5
Various fixtures suited for individual workpieces can be 7.3
prepared. Measuring accuracy is subject to fixture accuracy.
7.6
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-12
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru