Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Micrometers Technical Data
SERIES 293 – Digimatic Micrometer Resolution: 0.001 mm (.0001")
Measuring force: 10 to 15N
• Easily integrated into a statistical process control or networked measurement system. Battery: SR44 (2 pcs) 938882
• Constant-force device: ratchet stop Battery life: Approx. 1.8 years under normal use
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals
that are then directly input to cells in off-the-shelf spreadsheet software such as Excel. Functions
• Measuring faces: Carbide
Origin point setting (ABS measurement system):
B Resets the ABS origin at the current spindle position to the
minimum value of the measuring range and switches to ABS
293-782 mode.
SPECIFICATIONS Zero setting (INC measurement system):
A brief press on the ZERO/ABS button sets display to zero at
Inch/Metric the current spindle position and switches to the incremental
(INC) measuring mode. A longer press resets to the ABS
Code No. Range Accuracy*1 Flatness Parallelism Price measuring mode.
±6 µm (±.0003") 0.6 µm 5 µm 600.00
293-782 300-325 mm (12-13") (.000024") (.0002") 602.00 Hold:
±7 µm (±.00035") 615.00 Pressing the HOLD button freezes the current value in the
293-783 325-350 mm (13-14") ±8 µm (±.0004") 6 µm 622.00 display. This function is useful for preserving a measurement
(.00024") 631.00 in situations of poor visibility where the instrument must be
293-784 350-375 mm (14-15") 644.00 moved away from the workpiece before the reading can be
655.00 recorded.
293-785 375-400 mm (15-16") 660.00
Function lock:
293-786 400-425 mm (16-17") This function allows the ORIGIN (origin point setting) function
and the ZERO (zero-setting ) function to be locked to prevent
293-787 425-450 mm (17-18") these points being reset accidentally.
293-788 450-475 mm (18-19") Auto power ON/OFF:
The reading on the LCD disappears after this instrument is
293-789 475-500 mm (19-20") 7 µm (.00028") idle for about 20 minutes, but the reading and measurement
mode are retained. Turning the spindle causes the reading to
reappear.
Data output:
Models equipped with this function have an output port for
transferring measurement data to a Statistical Process Control
(SPC) system.
Error alarm:
In the unlikely event of a display overflow or calculation
error, an error message is displayed and measurement stops.
Measurement cannot continue until the error is corrected.
Also, if the battery voltage drops below a certain point, the
battery indicator will turn on before measurement becomes
impossible, warning the user that the battery needs to be
replaced.
* Excluding quantizing error.
Optional Accessories
DIMENSIONS 04AZB512: L-type SPC data cable (1 m)
65.00
04AZB513: L-type SPC data cable (2 m)
Unit: mm 68.00
28 L 28 2 55.3 3 50 17 959149: SPC data cable with pushbutton* (1 m)
18 35 34.60
5 959150: SPC data cable with pushbutton* (2 m)
12 39.40
a
02AZD790E: SPC data cable for U-WAVE-T (160 mm)
8 52.20
21
* May interfere with operating the thimble.
330°
Range La Range La
300-325 mm 353 187 400-425 mm 453 236
325-350 mm 378 199 425-450 mm 478 248
350-375 mm 403 212 450-475 mm 503 261
375-400 mm 428 224 475-500 mm 528 273
B-9 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru