Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Optional Styli
Compatible with SJ-410, SJ-500, SV-2100, SV-3100, SV-C3200, SV-C4500 series
11.5 10 60 14 Detector (0.75mN): 178-396-2 Technical Data
3.1 Detector (4mN): 178-397-2
14 1. Standard stylus
1.3 12AAE882 (1 m)*1
3.6 12AAE924 (1 m)*2
12AAC731 (2 m)*1
14 12AAB403 (5 m)*2
8 12AAB415 (10 m)*2
12AAE883 (250 m)*1
7 Skid nosepiece Detector
4 12AAB355
178-396-2 Detector (0.75 mN) 12AAG202 50 mm extension rod 2. Double length for deep hole Unit: mm
178-397-2 Detector (4 mN) 12AAG203 100 mm extension rod
12AAE898 (2 m)*1
12AAE914 (5 m)*2
44.7 12AAE882 (1µm)* 94.7
0.9 37.7 12AAE924 (1µm)** 87.7 11(*T22ip):AAaTniAApg3 lrEEea.:d891116iFu091222os°84AAAr *sAAA((*m25TCBBiµµpamm744alln301))gh**246leo*:l 9e0° (2 m)*1
12AAC731 (2µm)* (5 m)*2
A 12AAB403 (5µm)** (10 m)*2
12AAB415 (10µm)**
1.2 12AAE883 (250µm) 0.6
60°/90°
( ): Tip radius
1. Standard stylus *Tip angle: 60° **Tip angle: 90°
Colour 7.6 4. For small hole/double length for deep hole
coding 5.2 12AAE892 (2 m)*1
2.4
Detail-A
3
1.8
2.4
12AAE908 (5 m)*2
2. Double length for deep hole*3 5. For very small hole
12AAC733 (2 m)*1
12AAB405 (5 m)*2
0.6 44.4 12AAB417 (10 m)*2
1.6 0.6 37.7 0.6 94.4
0.4 0.6 15 87.7 6. For small hole
60°/90° Colour 12AAC732 (2µm)* 0.6 12AAE884
Detail-A A coding2.41122AAAABB4401460.6((51µ0mµm)*)*** 30 (0.8 mm)
(S=5/1) 2.4 3.4
3.4 ( ): Tip rDaedtiauisl-A 1.6 7. For extra-small hole
1.6 *Tip angle: 60° **Tip angle: 90°A 1.2
1.2 2.4 12AAE892 (( 25µµ111mm222))*AAA**AAABBC447013684 (2 m)*1
2.4 12AAE908 (5 m)*2
(10 m)*2
( ): Tip radius
3. For small hole 4. For small hole/double length for deep hole*3 *Tip angle: 60° **8Ti.pFanogrle:u9l0t°ra-small hole
12AAJ662 (250 µm)
9. For deep hole (double length)
12AAC740 (2 m)*1
0.4 44.2 93.8 12AAE8 841122(0AA.AA8mBBm4412) 35 (5 m)*2
37.7 87.7 (10 m)*2
0.3 8.9 41
60°/90°
Detail-A A Colour
(S=5/1) coding
1.2 12AAC733 (2µm)* ( ): Tip radius
1.2 12AAB405 (5µm)** 10. For deep hole (triple length)
0.6 12AAB417 (10µm)** 12AAC741 (2 m)*1
12AAB414 (5 m)*2
2.5 ( ): Tip radius 12AAB426 (10 m)*2
2.4 0.3
*Tip angle: 60° **Tip angle: 90° 1.2
Ball 1.6
3.1
2.4 11. For small slotted hole
2.4 12AAE938 (2 m)*1
5. For very small hole 6. For small hole*3*4 12AAE940 (5 m)*2
0.4 44.2 Tip radius 1 µm 2 µm 5 µm 10 µm 250 µm
37.7
0.3 8.9 12AAC734 (2µm)* 8.5 Colour coding White Black No Yellow No notch
60°/90° A colour or colour
Detail-A A Colour
(S=5/1) coding
0.8 12AAB406 (5µm)**
0.8 12AAB41B8all (100.5µm)**
0.6 37.7 ( ) tip radius
( ): Tip radius Detail-A 43.8 *1 60 tip angle
2.5 *2 90 tip angle
2.4 *Tip angle: 60° **Tip angle: 90° *3 For downward-facing measurement only
*4 Used for calibration, a standard step gauge
7. For extra-small hole 8. For ultra-small hole*3*4 (178-611 optional accessory) is also required.
L
Colour 94.7 12AAC740 (2µmCo)l*our 144.7 12AAC741 (2µm)*
coding 12AAB413 (5µmco)d*in*g 0.9 137.7 12AAB414 (5µm)**
0.9 87.7 12AAB425 (10µm)** 12AAB426 (10µm)**
A A
( ): Tip radius ( ): Tip radius
1.2
*Tip angle: 60° D*et*aTili-pAangle: 90° 60°/90° *Tip angle: 60° **Tip angle: 90°
7.6
5.2
2.4
7.6
5.2
2.4
1.2
Detail-A 60°/90°
9. For deep hole (double length)*3 10. For deep hole (triple length)*3
0.6 94.4 12AAE938 (2µm)*
0.6 87.7 12AAE940 (5µm)**
0.6
Detail-A 45 ( ): Tip radius
A *Tip angle: 60° **Tip angle: 90°
11. For small slotted hole*3
1.6
0.4
0.3
1.2
2.4
L-27 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru