Mitutoyo - Полный каталог инструмента - 2014 Английский язык
для размещения заказа - mitutoyo@mitutoyo-tools.ru
Technical Data 44.7 12AAC735 (2µm)* 95.2 12AAE893 (
0.9 37.7 12AAB409 (5µm)** 87.7 12AAE909 (
1. For deep groove (10 mm) 12AAB421 (10µm)**
12AAC735 (2 m)*1 Colour A ( ): Tip radius
coding ( ): Tip radius
1.2 *Tip angle: 60°
Detail-A 60°/90° *Tip angle: 60° **Tip angle: 90°
12AAB409 (5 m)*2 14.2 2.4
12AAB421 (10 m)*2 13 n1.2
2.4
23
21.8
5.2
2. For deep groove (20 mm)/double length for deep hole
12AAE893 (2 m)*1
12AAE909 (5 m)*2
1. For deep groove (10 mm) 2. For deep groove (20 mm)/double length for deep hole*4
3. For deep groove (20 mm)
12AAC736 (2 m)*1
12AAB408 (5 m)*2 0.9 45.2
37.7
12AAB420 (10 m)*2 12AAC736 (2µm)*
12AAB408 (5µm)** 2.4
4. For deep groove (40 mm) 24.2 12AAB420 (10µm)** 12AAE895 (2µm)*
23 12AAE911 (5µm)**
2.4 ( ): Tip radius
12AAE895 (2 m)*1 37.7 43.8 ( ): Tip radius
12AAE911 (5 m)*2 Colour 44.7 *Tip angle: 60° **Tip angle: 90° 42.6
coding A 5.2 *Tip angle: 60° **Tip angle: 90°
5. For deep groove (30 mm) Detail-A 1.2 2.4
60°/90°
12AAC737 (2 m)*1 1.2
12AAB407 (5 m)*2
12AAB419 (10 m)*2 3. For deep groove (20 mm)*3 4. For deep groove (40 mm)*3
6. For deep groove (30 mm)/double length for deep hole
12AAE894 (2 m)*1
12AAE910 (5 m)*2 93.8
37.7 87.7
2.4
45.2
7. For gear tooth (2 m)*1 33
12AAB339 (5 m)*1 31.8 12AAC737 (2µm)* 36.5 12AAE894 (2
12AAB410 (10 m)*1 5.2 12AAB407 (5µm)** 35 12AAE910 (5
12AAB422 12AAB419 (10µm)** 5.2
2.4 ( ): Tip radius
Colour A ( ): Tip radius 3
coding *Tip angle: 60° **
1.2 *Tip angle: 60° **Tip angle: 90°
8. For gear tooth/double length for deep hole Detail-A 60°/90°
12AAE896 (2 m)*1 1.2
12AAE912 (5 m)*1 5. For deep groove (30 mm)*3 6. For deep groove (30 mm)*3/double length for deep hole
9. For rolling circle waviness surface
12AAB338 (0.8 mm)
93.8
10. For rolling circle waviness/double length for deep hole 43.8 87.7
37.7
12AAE886 (250 µm) 60° 12AAE896 (2µm)*
60° 12AAE912 (5µm)*
11. For knife-edge detector 12AAB339 (2µm)*
12AAB410 (5µm)** ( ): Tip radius
12AAB422 (10µm)**
( ): Tip radius
*Tip angle: 60° **Tip angle: 90°
12AAC738 (2 m)*1 Colour 7.6
12AAB411 (5 m)*2 coding 6.4
12AAB423 (10 m)*2 Detail-A A
2.41.2
36.5
35
6.77
3
12. For corner hole/double length for deep hole 60°/90° 1.2
12AAM601 (2 m)*1
12AAM603 (5 m)*1 7. For gear tooth 8. For gear tooth*3/double length for deep hole
13. For eccentric arm
12AAC739 (2 m)*1
12AAB412 (5 m)*2
12AAB424 (10 m)*2 44.7 94.7
0.9 37.7 87.7
14. For bottom surface 12AAB338 (0.8mm) 0.9 12AAE886
12AAE899 (2 m)*1 Ball 1.588 1.2
1.2 ( ): Tip radius ( ): Tip radius
7.6
12AAE915 (5 m)*2 5.2
2.4
7.6
6.4
5.2
2.4
Tip radius 1 µm 2 µm 5 µm 10 µm 250 µm
Colour coding White Black No Yellow No notch 9. For rolling circle waviness surface*4 10. For rolling circle waviness*3/double length for deep hole*4
colour or colour
L
( ) tip radius
*1 60 tip angle 0.9 44.7 12AAC738 (2µm)* 93.8
*2 90 tip angle A 37.7 12AAB411 (5µm)** 87.7
*3 For downward-facing measurement only 12AAB423 (10µm)**
*4 Used for calibration, a standard step gauge Colour 7.6 25°
(178-611 optional accessory) is also required. coding 2.4 ( ): Tip radius 60°
1.2
Detail-A 60°/90° *Tip angle: 60° **Tip angle: 90° 1.2
60°
7.6
6.4
2.4
11. For knife-edge detector 12. For corner hole*3/double length for deep hole
45.2 12AAC739 (2µm)*
10 0.9 37.7 12AAB412 (5µm)**
12AAB424 (10µm)**
A
2.4 ( ): Tip radius 44.3 12AAE899 (2µm)*
7.6 0.5 37.7 12AAE915 (5µm)**
2.4 *Tip angle: 60° **Tip angle: 90°
1.2 1 ( ): Tip radius
60°/90° 60°/90°
6.2 *Tip angle: 60° **Tip angle: 9
5
Colour 2.4
coding
Detail-A
13. For eccentric arm*3 14. For bottom surface
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. L-28
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
mitutoyo@mitutoyo-tools.ru www.mitutoyo-tools.ru